This is a H0e scale model designed to fit around a Life-Like SW9 chassis with only small adjustments required to the chassis.

Couplings are also required to complete the model.

This is a generic model of the Puffing Billy Railway NA.

It fits over a Graham Farish Class 08 N scale mechanism.

The kit contains the following parts :
1 The NA Body
2 A pair of bogies and wheelsets(1.5mm dia screws are needed to fix the bogies to the body.)
3 A chimney which can be fixed on the spigot provided.
4 Three pairs of number plates (1A,14A,17A) with tabs that fit into slots in the side tanks.
5 Two caps that fit into slots under the water tanks.
6 Two pairs of connecting rods.(The working of these rods has not been tested)

A second chimney and number plates ie.2A to 17A are available separately in my shop.
Slots are provide for attaching N scale micro-couplers.
The side tanks are hollow which can filled with araldite and buckshot to increase weight.

The fine detail of the number plates print well only in the Frosted Ultra-Detail version.Decals can be used if you order this model in the Frosted detail material.

The decal sheet for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=52567msg_52567

This is a H0e Scale model of a USSR Tu2 750mm narrow gauge locomotive. Chassis (motor, gears wheels etc) and detail items (handrails) required to complete.

Spur TT Modell eines Klima Schneepflug Bauart „Linz“
Dieser Schneepflug Typ wurde von Henschel in Kassel gebaut unter Verwendung von Rahmen und Fahrwerk der Firma Dolberg aus Rostock. Diese Schneepflüge waren bei beiden deutschen Bahnverwaltungen ( DR und DB ) im Einsatz.

TT scale model snow plow type „Linz“
The snow plow type was built by Henschel in Kassel using framework and undercarriage produced by Dolberg / Rostock. These snow plows were used by two German rail way companies (DR and DB).

The mechanism for this model is a "Pro-hobby Caramel Ca-ND 1".
Link to the mechanism:
http://www.osbornsmodels.com/pro-hobby-ca-nd-1-carmel-micro-n-scale-chassis-8727-p.asp

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=51263msg_51263

Handrails can be added using the locating dimples which are provided in the model.
Slots are provided for mounting N-scale micro-couplers.

This model is also available in 1:76.2 scale.

This is an TTe scale model of a German narrow gauge railway snow plow. The original will be moved by a steam or diesel engine. So you only need 2 jeweled gear sets and 4 metallic bushings, wire for handrails, some paint, plastic windows and after a few hours the snow plow is ready to go. TTe Schmalspur Schneepflug. Das Original wird geschoben durch Dampf- oder Dieselloks. So benötigen sie nur noch 2 spitzengelagerte Radsätze, 4 Metallbuchsen, Draht für die Griffstangen, etwas Farbe, Kunststofffenster und schon nach einigen Stunden ist Ihr Modell einsatzbereit.

Here is a kit of parts to aid in the construction of an OeBB Schmalspur Schneepflug, the kit is H0e scale. Chassis, wheels and couplings required to complete.

This kit contains the MailMotor + 1 Trolley + 1 Flat + Endcar.
Additional units are available for sale separately.

The mechanism for driving the mail car is a " Pro-Type CA-ndy 01".

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50958msg_50958

This is a H0e Scale model of a Polish Lyd1 narrow gauge locomotive.

This is the Front Unit of the HOn30 PBR G42 kit.

---

Want to get a set?

+ + +

---

An HOn30 model of a General Electric 25-ton industrial 30" narrow gauge locomotive. This model comes in two pieces that snap together. It is designed to fit a Kato 11-103 N scale mechanism. See the photos for more details.

HOn30/OO9 Freelance Diesel Locomotive Design #1

Features:
- Self Positionable Cab Doors
- 2 Driver's Cabs
- Full  Pilot Steps

Dimensions (Assembled)
Height (Above Railhead) 4cm (11.25 HO scale feet)
Width 2.5cm (7 scale feet)
Length (Without Couplers) 12.3 cm (35 scale feet)

Designed to fit on an N Scale GP40 chassis, but can be adapted to other chassis or gauges at your own risk. The floor of the body is solid to allow custom fitting for your needs.

Will take Fox Valley (3601-.540" Axle ) 36" N gauge wheelsets

5 H0e tippers modelled after the Spoorijzer KW13 1m3. This is the exact version. For the Roco / Minitrains / Egger-Bahn compatible version see here

Wheels
The model is designed to been used with these axles. But any H0e axle ~14mm wide and with a flange no larger than 7.6mm in diameter will do. Some examples are the Sehling RDS4.3-SH0e wheels, Metal Wheels from Nigel Lawton or Roco / Fleischmann 20024.

Photo's:
Live in action at the brickworks "de Nijverheid" in Azewijn (the Netherlands)
At the MWL narrow gauge museum in Losser (the Netherlands)
A monument in Marknesse (the Netherlands) on my Flickr stream

Video:
Clay transport from pit to factory at "De Vlijt" Winterswijk (the Netherlands) on October 14 1986

Coupling:
How to bend the coupling is described in this forum post.

Note: The photo's of the model are the Roco/Minitrains/Egger-Bahn compatible version.

The mechanism for this model is a "Pro-hobby Caramel Ca-ND 1".
Link to the mechanism:
http://www.osbornsmodels.com/pro-hobby-ca-nd-1-carmel-micro-n-scale-chassis-8727-p.asp

Handrails can be added using the locating dimples which are provided in the model

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50814msg_50814

This model is also available in 1:43 and 1:76.2 Scale.

 Old type Wheel stop for HO, HOn3 and HOn30 gauge. Will fit rail size from code 40 to code 70, though the slot may need widening for certain rail sections.

With some work can be adapted for heaver rail.

Supplied in 100 off bulk pack so sufficent for ends of 50 sidings.

Please note although it's fully modeled as in the render not all detail will print as drawn because it's too small - but then it's goint to be hard see all that detail anyway !

Also note it's meant to have ribs on one side only !

This is a TT scale model of a special German tram to repair the overhead contact line.
The original is in action for the tram in Cottbus. It is a body exclusive of drive (stage position at the top). You also need a pantograph, wire for the rails and ladders, some paint, plastic windows and after a few hours here you are a finished tram model.

TT Arbeitstriebwagen
Das Original wurde in Cottbus eingesetzt und entstand aus einem CKD T2D. Es ist ein Standmodell ohne Antrieb (Bühnenposition oben). Sie benötigen nur noch einen Dachstromabnehmer, etwas Draht für Leitern und Geländer, Farbe, Kunststofffenster und nach einigen Stunden ist Ihr Straßenbahnmodell fertig.

 Open cab version

Designed to be fit onto a n drive, ibertren or bachmann dock tank chassis. kato tram chassis should be possible but prototpically incorrect. If anyone has bought this please feel free to share your pictures

Has NOT been test printed.