by
stonysmith
1:220 scale (Z scale)
For LGThek's chassis. Please refer to http://www.zcentralstation.com/index.php?option=com_kunena&Itemid=0&func=view&catid=33&id=10914 for full story and links.
It's similiar to a GS1 switcher, with a few tweaks/differences, hence the name Rebel.
Note: July 1, 2011: handrails thickened up a bit to help survive cleaning and shipping.
For LGThek's chassis. Please refer to http://www.zcentralstation.com/index.php?option=com_kunena&Itemid=0&func=view&catid=33&id=10914 for full story and links.
It's similiar to a GS1 switcher, with a few tweaks/differences, hence the name Rebel.
Note: July 1, 2011: handrails thickened up a bit to help survive cleaning and shipping.
by
stonysmith
1:220
For a prototype see: http://www.railking.net/documents/10-07-023%20RK275.pdf
On the side of the engine housing is a clip designed to be cut off and used to hold the tires in an up or down position.
Directions at http://bit.ly/n0ajlh
16 Oct 2011: updated railings for min wall thickness
For a prototype see: http://www.railking.net/documents/10-07-023%20RK275.pdf
On the side of the engine housing is a clip designed to be cut off and used to hold the tires in an up or down position.
Directions at http://bit.ly/n0ajlh
16 Oct 2011: updated railings for min wall thickness
by
monitep
Ring with a vortex shape.
Internal diameter available from 14mm to 22mm.
Internal diameter available from 14mm to 22mm.
by
stonysmith
1:220 scale
The long part of the bumper is attached to the sprue, and should be trimmed to length as desired. The "back side" is separate from the sprue.
The long part of the bumper is attached to the sprue, and should be trimmed to length as desired. The "back side" is separate from the sprue.
