[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]

Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!

The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.

The 3D printed Strandbeest is sold separately.

A few tips to consider:

- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.

- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.

Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.

The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.

How to Use the Nocturnal:

The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.

Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.

Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.

Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.

Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.

So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.

Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?

Sad Keanu comes in two sizes. Both are equally sad.

Teeny Keanu -- 2.6inches -- ($25) Little Keanu -- 4inches -- ($45)

---

Want to get a set?

+

---

A large Steampunk themed twenty sided die.

The first public evolution of the Animaris Geneticus Parvus, #5. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros". The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!

A few tips to consider:

- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!

- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. 

- The best way to push it is by its nameplate. Do not push down, but forward

Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk. When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.

The Road Popper is a bike-mounted bottle opener that we developed for our own use and decided afterward to share. We designed it to fasten discreetly to the rails on the underside of the saddle to help keep your bike looking crisp. So far, it's worked on all the bottle caps we've tried it on. Material options are bronze infused stainless steel. Finish options are plain (on the right in the photograph), matte gold, glossy gold, matte antique bronze, and glossy antique bronze. The Road Popper is not intended for alcoholic beverages. Chromoly does not condone cycling while under the influence of alcohol.


Things You'll Need for Installation (not included with purchase)

2 - 3/8” long #6 flat head (countersunk) screws
2 - Nylon locknuts
1 - Screwdriver
1 - Needle nose pliers


Bike Requirements

Conventional bike saddle. If you're not sure if your seat is standard or not, give it a measure. The rails should be 7 mm's (0.275 inch) in diameter and roughly 44mm's (1.73 inch) apart.

At least 228mm's (9”) of space between the underside of your seat and your tire.

9mm's (3/8”) of open rail behind where the seat attaches to the seat post.


*Because this product is fabricated to order it is more expensive that it would be under normal manufacturing conditions. For this same reason it takes about 14 working days to arrive. The cost of shipping (via UPS) is included in the list price. Please note that duties and taxes may be applied to your order when it enters your country.

This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!

*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains

UPDATE: Click this link to see the new version with loops for easy addition of a necklace chain! *Chain NOT included*

Makes a great Valentine's Day gift!!

They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.

pendant with hearts and leaves

Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.

A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

This little planter has been hit by a shrink ray! No, just kidding, it's based on the design of another one, but is 40% smaller. With this miniature wearable planter, you can carry a small plant or a small flower with you on your day's adventures. The much smaller size allows the production process to use considerably less plastic, which translates to a much smaller price. Unlike it's larger older sister, this wearable planter is made of an acrylic polymer. This material has a beautiful smooth finish and does not need to be painted like other necklaces I make that are made out of nylon. The material is inherently watertight as well! Like the other wearable planters, this one is created with the same modeling software and on the same style of 3d printer. This planter is an experiment with scale. It is made of the same acrylic polymer as the translucent planters, but is a much smaller size. This material is watertight, and acts as a perfect vase to carry a bud or a sprout on your day's adventures. Orders from Shapeways do not include a cord, if you would like a cord with your necklace, please buy one from my website www.wearableplanter.com.

No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.

The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.

Use one of the following links to choose a different ring size.

US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in

US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in

US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in

US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in

US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in

US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in

US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in

US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in

US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in

US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in

Other size needed? Just send me a message!

Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.

This steampunk style knotted cog was procedurally generated using 3-dimensional spherical geometry, then stereographically projected into our (mostly) Euclidean universe.

Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html

This steampunk style knotted cog was procedurally generated using 3-dimensional spherical geometry, then stereographically projected into our (mostly) Euclidean universe.

Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html

You type in text and we turn it into a customized metal 3D print. All objects on Shapeways are for decorative uses only.

- Lighter sold separately.
- The Lighter is a Cricket Electronic.
- Original lighter metal needs to be removed first.

If you are looking for a version that fits a different lighter go here: http://www.shapeways.com/model/111548/

The Ossuary set of dice piles together skulls with large flat numerals (or pips in the case of the four sided die).
They're intended to add a hint of the mortuary madness of the Paris Catacombs to your die rolling, while remaining pleasant to handle and roll.

Set of six dice, fifty (count 'em) skulls.
Twenty sided, from twelve skulls.
Twelve sided, eight skulls with side bones.
Ten sided, with another twelve skulls.

Eight sided, built from six skulls.
Six sided, built from eight skulls.

Four sided, a simple tetrahedral pyramid of skulls.

a fully articulated mini figure that can twist torso and bend knees. Made to be compatible with most brick brands. Please be gentle when connecting parts together especially the knees. If you order it with a coloured material, you may have to remove some of the polyamide powder that will be stuck inside the knees' joints (you can remove it using a toothpick).

Pendant with delicate design of blossom branch.
Specialy designed for silver.
Perfect as a special gift for your beloved one.

If you want Coloured version, head over here : Blossom Heart
Smaller version of the design : Silver Blossom heart Smaller

The Guy Fawkes mask that has become a symbol of solidarity among the anonymous 99% of the "Occupy" movement & an indelible icon in political & pop culture. Smallest size (1 inch) available in Silver at this scale. Features a ring on the back to wear as a necklace or hang as a pendant.

 5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman. 

Hoodie comes in many variations and can be found in the Dot San shop.

More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm

Plain Hoodies 
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm

Customized 
Hibs Hoodie 7cm
Hearts Hoodie 7cm

The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.

www.dotsan.com