ElisaRichardson

by JoshuaHarker
love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.
 
(16)  
  •  
From: $35.00
 
by AceD
[UPDATE] 24/01/2013:
The amulet is now available in a few smaller sizes:
Amulet 3.5cm

Amulet 3.0cm

///////////////
Amulet is 4 cm (1.6 in) with increased details!!!
(like the mouth and eyes, to make the lines more visible)
For the ones who think it's a bit to dark i would suggest to order it in Gold Plated Glossy.

Amulet comes without a cord!

For infos about the materials pls check this site: http://www.shapeways.com/materials/steel

This amulet was inspired from the amulet which Dean Winchester is wearing in the TV-Series SUPERNATURAL.
Should be very screen accurate.

Please rate the amulet if you like it. Thanks! :)

Neue, überarbeitete Version. Auf 4cm vergrößert und Detailgrad erhöht!!
Details an den Augen und dem Mund wurden ebenfalls verstärkt, um sie deutlicher zu machen.
Wem das Material "Antique Bronze Glossy" zu dunkel ist, dem schlage ich vor "Gold Plated Glossy" zu wählen :)

Dieses Amulett ist inspiriert von der Halskette die Dean Winchester in SUPERNATURAL trägt. Habe sie möglichst detailgetreu nachempfunden und kommt dem Original sehr Nahe finde ich.

Hoffe, es gefällt euch :) Dürft es gerne oberhalb dieser Seite mit den Sternen bewerten. Danke!
 
(18)  
  •  
From: $39.27
 
by Eeppium
A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
 
(7)  
  •  
From: $27.20
 
by Wahtah
A Sierpinski tetrahedron, the 3D version of the Sierpinski triangle, stage 5 I think. There are 4096 of the smallest triangles and 1024 of the smallest tetrahedrons. The model has 499994 faces.

Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.

The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.

The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.

I created the model using POVray and MeshLab.
 
(2)  
  •  
From: $48.94
 
by kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
 
(6)  
  •  
From: $13.00
 
by TheoJansen
[Note: The seperate propeller does not fit the Ondula version! We are working on a propeller for the Ondula]

Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.

Currently there is no propellor available for this version, it is being worked on though!

In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
 
(9)  
  •  
From: $106.83
 
by virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!


I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!

More earrings
 
(30)  
  •  
From: $77.50
 
by sevensheaven
A full-color, high-quality 3D-printed bust of the legendary, celebrated former Apple founder and CEO Steve Jobs, modeled and textured in a retro 3D pixel style by the Dutch Sevensheaven design studio.

Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.

Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.
 
(39)  
  •  
From: $99.33
 
by VapourStudios

Bugle for iPhone 4 / 4S

Please click here to buy

Enjoy your music louder with the Bugle

 
(2)  
  •  
Not For Sale
 
by OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design. It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
 
(13)  
  •  
From: $140.07
 
by tomorrowlab

Solo e Sola is an espresso cup that holds a single cigarette.


The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.


A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.

 
(3)  
  •  
From: $59.99
 
by Dotsan
No2 in the series of 3D printed animal heads.

The Animal Head Collection.

3D Printed Animal Heads

No 1 is a
Stag head. 

There is also a 75mm version here  and a 300mm version here 

No 3 is a Rhino.  A large Rhino  is also available.

No 4 is a Tiger. 

Tiger Head 2. 

Large Tiger Head.

5 is an Elephant. 

I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF  and WSF.  Both materials tell a different story.

Please send your pictures and share your thoughts on the design.
 
(4)  
  •  
From: $25.41
 
by SheilaMunro
Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.
 
(6)  
  •  
From: $39.10
 
by SheilaMunro
The Neverending Story AURYN Medallion. The model is hollowed out on the backside, backside is flat with grooves. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca
 
(13)  
  •  
From: $51.50
 
by joabaldwin
The bony skeletal structure of an origami paper crane. Created following the traditional crane model, for any lovers or the art of paper folding out there.

The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?
 
(4)  
  •  
From: $18.00
 
by joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.

All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.

-- Kosher. Vegan friendly. --

Disclaimer for idiots: Don't eat it.
 
(7)  
  •  
From: $19.00
 
by danieljchamberlin

The Hidden Heart Espresso Cup


Perfect for Valentine's Day (or any other day needing a little heart), The Hidden Heart Espresso Cup reveals a perfect heart shape when a double shot of espresso is poured into it. Because of its complex contours, this hidden shape can't be made with traditional molds or normal ceramic fabrication processes. Food-safe in Glazed Ceramics, and 2 make a perfect couple!

More about why complex shapes are difficult in ceramic:

Ceramic is usually either spun or poured into 2 part molds, but there are several limitations to this. With a spun piece (think pottery wheel), you can only easily make symmetrical shapes, and then if you want alter them a little bit from the outside. With a mold, you can make more complicated shapes but to be able to remove it from the mold, you can't have any contours that overhang (the underside, like a cliff, will get caught on the mold and you won't be able to pull it out). This is usually what's called draft.

3D Printing is Cool

Anyway with 3D printing those aren't problems, since the form is being built up layer by layer. The issue of draft goes away entirely, and there's much more freedom to focus on design. I like to design for the hand as well as the eye. Kitchen, food, and drink-ware should almost slide into your hand, and give you a closer connection to what you are putting in your body.

Of course, you still have to consider wall thickness and minimum feature height and a couple other things, but that's not a bad trade-off for getting any form you can image!

* Please note that the saucer is sold separately.

PS - If anyone has a picture of their Hidden Heart Cup in action they'd like to share, please send it my way at danieljchamberlin@gmail.com and I'll add it to this page! Thanks!
 
(4)  
  •  
From: $55.00
 
by JoshuaHarker
Depicting the bittersweet experience of love & loss as well as suggesting that love is what you make of it. The anchor & chain are intended to symbolize the security of steadfast loyalty in stormy seas & that which keeps you from becoming aimlessly adrift. The arrow is love's tool of capture & the weeping tear symbolizes the pain of loss. The suspended ring demonstrates the promise of commitment. The skull is the symbol of the end of us all & the reminder of living in the present. See here for 3D Viewer
 
(18)  
  •  
From: $105.00
 
by Dotsan
 5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman

Hoodie comes in many variations and can be found in the Dot San shop.

More Hoodies:
Burgerman Hoodies, 7cm5cm & 2cm

Plain Hoodies 
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm

Customized 
Hibs Hoodie 7cm
Hearts Hoodie 7cm

The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.

www.dotsan.com 
 
(23)  
  •  
From: $19.89
 
by jayfisher
The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.

[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]

Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter

Scale: 1 : 251102362

The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)

Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.

vBulletin statistics
 
(3)  
  •  
From: $32.76
 
by unellenu

Snowflake fractal pendant or decoration, pictured in white, strong and flexible.

This design looks beautiful worn as a pendant, and can also be hung as a tree ornament.

Dimensions of the pendant are cm:4.75 w x 4.908 d x 1.332 h / in:1.9 w x 1.9 d x 0.5 h (the dimensions of every Shapeways model are also on each page - near the bottom of the page).

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

unellenu website
http://unellenu.com

twitter: unellenu
http://twitter.com/unellenu

facebook: unellenu jewellery
http://www.facebook.com/unellenu

facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813

youtube: unellenu
http://www.youtube.com/unellenu1


Save


 
(5)  
  •  
From: $18.00
 
by Danyboy
The Hipster pick for the 2011 Holiday season!

Our living room wall is decorated with some LP's which are, in turn, decorated with some 3d printed goodness: two birds on a branch, tweeting along to your favourite music. The branch can be clipped onto wall mounts for records.

Goes well with the second clip-on model: the vinyl notes.
 
(12)  
  •  
From: $3.07
 
by macouno
The original Petunia model.
 
(32)  
  •  
From: $44.16
 
by HappenstanceHeroes
This little guy is a fox and proud of it.

This incarnation is best suited to use as a decorative object, but we're open to suggestions for how you'd like to see it modified for your use!

The two most interesting uses we've found so far are using the WSF (polished) version as a surprisingly striking little glow bulb if you shine a light inside it, and possibly using the (pleasantly hefty) stainless steel version as an imposing game board piece.


To the customer who recently ordered this in Antique Bronze Matte, we would love to hear from you as to how your order turns out! Please consider sharing a photo or your thoughts on it if you find the time. :)
 
(9)  
  •  
From: $6.53
 
by abite
*Important: Rubber-sponge gaskets for preventing sound leakage are ready. If you have ordered this item, please PM or email me with your order information and address. jcho@abitedesign.com.
I will send you a couple of gaskets via airmail.
---------------------------------------------------

The Minimized Gramophone "iAcoustic S" is an accessory for your iPhone, but it was not intended for an additional, separate device.
You need the charging cable for the iPhone every day, and the iAcoustic S was designed to transform the cable into a multi-functional device. The cable dressed up with the iAcoustic S can become an acoustic amplifier and a stand as well as a charger. When you put the cable into your bag, the iAcoustic S can also be a cable winder.

Its design was simplified for following the additional functions, and to provice the longer vibrating air column for the better and louder sound quality, its curved tube shape was created. The thickness of its bell and curved tube is 0.8mm.

It can also fit the iPhone with a typical case or a bumper. A mock-up plug is included, so you can use it instead of the charging cable when you don't need the cable.

- Link for iPhone 4/4S version -

* It works with the original charging cable.
 
(4)  
  •  
From: $19.86
 
by Martynas
Rat earrings.
Tested in stainless steel. The earrings are heavy and the hook is thick, but they are suitable for wearing and are easier to put on than their strong and flexible material version. The hooks on the ones in the photos are slightly polished so they are a bit different from what comes straight from Shapeways.
Please feel free to download and use this model any way you wish.

CC0
To the extent possible under law, Martynas has waived all copyright and related or neighboring rights to Rat Earings.

 
(8)  
  •  
From: $5.95
 
by MichaelMueller
This is a full working tabacco pipe. The head is made with glazed ceramics, the mouthpiece is antique bronze glossy.

+


A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!

Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!


Please message me if you have any questions.
 
(3)  
  •  
From: $40.78
 
by rinblad
An ornament in the shape of a tree, with some of the roots creating a garland around it. This ornament can stand on a surface or be hung in a window, in a tree or on a door. The branches produce a beautiful pattern regardless of which angle you view it in. All the lines is flowing and come together in harmony. Please note that the "White Strong & Flexible" material will turn yellowish if you leave it in the sun. If you're going to hang it in a window, make sure it faces the side of the building with most shadow.
 
(13)  
  •  
From: $27.36
 
by ryankittleson
UNSTOPPABLE! So, before you buy this, I just want you to know that there's a little addition to it that's different from the photo. Check out the 3D rendered image to see what I mean. I had to add this to make the graspers more sturdy. So I guess now it's more accurate to the meme AND less fragile! whoopie!
 
(9)  
  •  
From: $34.99
 
by wpagnes82828
for iphone 4/4s. The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure. The case is stylish and in the same time heat eliminated.
 
(9)  
  •  
From: $13.21
 
by Gilbert13
"Kardia" Heart Pendant displays the anatomical beauty of the heart in all its glory. Can be used as a necklace or as a keyring. Please note the pendant is sold without the chain and the pendant shown is produced in Gold Plated Matte.
 
(3)  
  •  
From: $47.31
 
by i8kermit
For all you computer animation lovers out there, this cufflink is for you! Note: This is for one cufflink. Order 2 for a full set, unless you rock your own style! For more on my designs, visit www.prero.com.

Want to get a set?

+




 
(5)  
  •  
From: $20.00
 
by rustylab
"Peep" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love. ***The chain is not included in the delivery.
 
(1)  
  •  
From: $20.96
 
by tristan_bethe
3D Scan of Grandpa

Photo References can be downloaded here:
imageafter.com/temp/tristan/GrandPaReferences.zip
 
(7)  
  •  
From: $61.31
 
by MaxiOli
This is an extension for the mini ES 2x2x2 puzzle

YOU NEED 8 PCS OF THIS to complete the "6 corners of the world" puzzle.
It was first showed at the following Twisty Puzzles Forum topic:
http://twistypuzzles.com/forum/viewtopic.php?f=15&t=19866

For the stickers, you need to contact me at: rubikkocka@gmail.com
 
(3)  
  •  
From: $4.92