ElisaRichardson

by GothamSmith
Bicycle Chainring Cufflinks perfect for use in a French cuff shirt.
 
(82)  
  •  
From: $59.00
 
by VENERIDESIGN
Nuke Lamp it's is a unique table lamp, its complex surfaces were created using real fluid dynamics simulations.
IMPORTANT:
The lamp consists of 2 parts, then you will receive 2 packages.... (open more info)...
one containing the 3D printed  piece from Shapeways, and a Kit containing the bulb and stand from Veneridesign, then please contact me info@veneridesign.com  for shipping address.
Thank you.


 
(56)  
  •  
From: $1,388.66
 
by JoshuaHarker
The filigree design over the skull symbolizes the ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Medium is between life-size & small version. See pic of 3 sizes together for comparison.
 
(29)  
  •  
From: $195.00
 
by colleenjordan
A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water. If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.
 
(10)  
  •  
From: $37.00
 
by chromoly
The Road Popper is a bike-mounted bottle opener that we developed for our own use and decided afterward to share. We designed it to fasten discreetly to the rails on the underside of the saddle to help keep your bike looking crisp. So far, it's worked on all the bottle caps we've tried it on. Material options are bronze infused stainless steel. Finish options are plain (on the right in the photograph), matte gold, glossy gold, matte antique bronze, and glossy antique bronze. The Road Popper is not intended for alcoholic beverages. Chromoly does not condone cycling while under the influence of alcohol.


Things You'll Need for Installation (not included with purchase)

2 - 3/8” long #6 flat head (countersunk) screws
2 - Nylon locknuts
1 - Screwdriver
1 - Needle nose pliers


Bike Requirements

Conventional bike saddle. If you're not sure if your seat is standard or not, give it a measure. The rails should be 7 mm's (0.275 inch) in diameter and roughly 44mm's (1.73 inch) apart.

At least 228mm's (9”) of space between the underside of your seat and your tire.

9mm's (3/8”) of open rail behind where the seat attaches to the seat post.


*Because this product is fabricated to order it is more expensive that it would be under normal manufacturing conditions. For this same reason it takes about 14 working days to arrive. The cost of shipping (via UPS) is included in the list price. Please note that duties and taxes may be applied to your order when it enters your country.
 
(38)  
  •  
From: $38.58
 
by schreerdesign
(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)

Want to get a set?

+




 
(27)  
  •  
From: $39.52
 
by Egant
When is the last time there has been an innovation in buttons? Answer, just now! This button not only holds your shirt together, but it also holds the cord for your ear buds and helps to keep them in your ears. Works for apple ear buds, and any cords with a 2 mm diameter.
 
(8)  
  •  
Not For Sale
 
by stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
 
(5)  
  •  
From: $37.17
 
by JoshuaHarker
love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.
 
(16)  
  •  
From: $35.00
 
by harryapeman
This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!

*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains
 
(5)  
  •  
From: $41.16
 
by AceD
[UPDATE] 24/01/2013:
The amulet is now available in a few smaller sizes:
Amulet 3.5cm

Amulet 3.0cm

///////////////
Amulet is 4 cm (1.6 in) with increased details!!!
(like the mouth and eyes, to make the lines more visible)
For the ones who think it's a bit to dark i would suggest to order it in Gold Plated Glossy.

Amulet comes without a cord!

For infos about the materials pls check this site: http://www.shapeways.com/materials/steel

This amulet was inspired from the amulet which Dean Winchester is wearing in the TV-Series SUPERNATURAL.
Should be very screen accurate.

Please rate the amulet if you like it. Thanks! :)

Neue, überarbeitete Version. Auf 4cm vergrößert und Detailgrad erhöht!!
Details an den Augen und dem Mund wurden ebenfalls verstärkt, um sie deutlicher zu machen.
Wem das Material "Antique Bronze Glossy" zu dunkel ist, dem schlage ich vor "Gold Plated Glossy" zu wählen :)

Dieses Amulett ist inspiriert von der Halskette die Dean Winchester in SUPERNATURAL trägt. Habe sie möglichst detailgetreu nachempfunden und kommt dem Original sehr Nahe finde ich.

Hoffe, es gefällt euch :) Dürft es gerne oberhalb dieser Seite mit den Sternen bewerten. Danke!
 
(18)  
  •  
From: $39.27
 
by Eeppium
A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
 
(7)  
  •  
From: $27.20
 
by kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
 
(5)  
  •  
From: $13.00
 
by Wahtah
A Sierpinski tetrahedron, the 3D version of the Sierpinski triangle, stage 5 I think. There are 4096 of the smallest tetrahedrons. The model has 499994 faces.

Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.

The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.

The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.

I created the model using POVray and MeshLab.
 
(2)  
  •  
From: $48.94
 
by TheoJansen
[Note: The seperate propeller does not fit the Ondula version! We are working on a propeller for the Ondula]

Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.

Currently there is no propellor available for this version, it is being worked on though!

In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
 
(9)  
  •  
From: $106.83
 
by virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!


I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!

More earrings
 
(30)  
  •  
From: $77.50
 
by sevensheaven
A full-color, high-quality 3D-printed bust of the legendary, celebrated former Apple founder and CEO Steve Jobs, modeled and textured in a retro 3D pixel style by the Dutch Sevensheaven design studio.

Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.

Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.
 
(38)  
  •  
From: $99.33
 
by OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design. It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
 
(13)  
  •  
From: $140.07
 
by curvecreative

Bugle for iPhone 4 / 4S

Enjoy your music louder with the Bugle

The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.

A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video

iPhone 5 version available here

 
(2)  
  •  
From: $19.99
 
by tomorrowlab

Solo e Sola is an espresso cup that holds a single cigarette.


The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.


A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.

 
(3)  
  •  
From: $59.99
 
by Dotsan
No2 in the series of 3D printed animal heads.

The Animal Head Collection.

3D Printed Animal Heads

No 1 is a
Stag head. 

There is also a 75mm version here  and a 300mm version here 

No 3 is a Rhino.  A large Rhino  is also available.

No 4 is a Tiger. 

Tiger Head 2. 

5 is an Elephant. 

I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF  and WSF.  Both materials tell a different story.

Please send your pictures and share your thoughts on the design.
 
(4)  
  •  
From: $25.41
 
by SheilaMunro
Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.
 
(6)  
  •  
From: $39.10
 
by SheilaMunro
The Neverending Story AURYN Medallion. The model is hollowed out on the backside, backside is flat with grooves. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca
 
(13)  
  •  
From: $51.50
 
by joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.

All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.

-- Kosher. Vegan friendly. --

Disclaimer for idiots: Don't eat it.
 
(7)  
  •  
From: $19.00
 
by danieljchamberlin

The Hidden Heart Espresso Cup


Perfect for Valentine's Day (or any other day needing a little heart), The Hidden Heart Espresso Cup reveals a perfect heart shape when a double shot of espresso is poured into it. Because of its complex contours, this hidden shape can't be made with traditional molds or normal ceramic fabrication processes. Food-safe in Glazed Ceramics, and 2 make a perfect couple!

More about why complex shapes are difficult in ceramic:

Ceramic is usually either spun or poured into 2 part molds, but there are several limitations to this. With a spun piece (think pottery wheel), you can only easily make symmetrical shapes, and then if you want alter them a little bit from the outside. With a mold, you can make more complicated shapes but to be able to remove it from the mold, you can't have any contours that overhang (the underside, like a cliff, will get caught on the mold and you won't be able to pull it out). This is usually what's called draft.

3D Printing is Cool

Anyway with 3D printing those aren't problems, since the form is being built up layer by layer. The issue of draft goes away entirely, and there's much more freedom to focus on design. I like to design for the hand as well as the eye. Kitchen, food, and drink-ware should almost slide into your hand, and give you a closer connection to what you are putting in your body.

Of course, you still have to consider wall thickness and minimum feature height and a couple other things, but that's not a bad trade-off for getting any form you can image!

* Please note that the saucer is sold separately.

PS - If anyone has a picture of their Hidden Heart Cup in action they'd like to share, please send it my way at danieljchamberlin@gmail.com and I'll add it to this page! Thanks!
 
(4)  
  •  
From: $55.00
 
by Dotsan
 5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman

Hoodie comes in many variations and can be found in the Dot San shop.

More Hoodies:
Burgerman Hoodies, 7cm5cm & 2cm

Plain Hoodies 
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm

Customized 
Hibs Hoodie 7cm
Hearts Hoodie 7cm

The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.

www.dotsan.com 
 
(23)  
  •  
From: $19.89
 
by joabaldwin
The bony skeletal structure of an origami paper crane. Created following the traditional crane model, for any lovers or the art of paper folding out there.

The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?
 
(4)  
  •  
From: $18.00
 
by JoshuaHarker
Depicting the bittersweet experience of love & loss as well as suggesting that love is what you make of it. The anchor & chain are intended to symbolize the security of steadfast loyalty in stormy seas & that which keeps you from becoming aimlessly adrift. The arrow is love's tool of capture & the weeping tear symbolizes the pain of loss. The suspended ring demonstrates the promise of commitment. The skull is the symbol of the end of us all & the reminder of living in the present. See here for 3D Viewer
 
(18)  
  •  
From: $105.00
 
by jayfisher
The Earth, Moon, and Mars, to scale, with 3D surface terrain and full color from the latest NASA space imaging.

[See also the solar system set (but note that set is a logrithmic scale, not linear like this one)]

Dimensions:
Earth: 50mm (2 inches) diameter
Mars: 27mm (1 inches) diameter
Moon: 13mm (0.54 inches) diameter

Scale: 1 : 251102362

The Earth and Mars globes are hollow, with a 12mm (1/2 inch) hole at the south pole, giving them a flat bottom on which to sit without rolling, but each also comes with a matching cap/plug to seal that hole, to form a full sphere. (The moon is solid)

Special thanks to NASA / JPL-Caltech, for allowing the use of their planet surface terrain and mapping.

vBulletin statistics
 
(3)  
  •  
From: $32.76
 
by unellenu

Snowflake fractal pendant or decoration, pictured in white, strong and flexible.

This design looks beautiful worn as a pendant, and can also be hung as a tree ornament.

Dimensions of the pendant are cm:4.75 w x 4.908 d x 1.332 h / in:1.9 w x 1.9 d x 0.5 h (the dimensions of every Shapeways model are also on each page - near the bottom of the page).

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

unellenu website
http://unellenu.com

twitter: unellenu
http://twitter.com/unellenu

facebook: unellenu jewellery
http://www.facebook.com/unellenu

facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813

youtube: unellenu
http://www.youtube.com/unellenu1


Save


 
(5)  
  •  
From: $18.00
 
by Danyboy
The Hipster pick for the 2011 Holiday season!

Our living room wall is decorated with some LP's which are, in turn, decorated with some 3d printed goodness: two birds on a branch, tweeting along to your favourite music. The branch can be clipped onto wall mounts for records.

Goes well with the second clip-on model: the vinyl notes.
 
(12)  
  •  
From: $3.07
 
by macouno
The original Petunia model.
 
(32)  
  •  
From: $44.16
 
by HappenstanceHeroes
This little guy is a fox and proud of it.

This incarnation is best suited to use as a decorative object, but we're open to suggestions for how you'd like to see it modified for your use!

The two most interesting uses we've found so far are using the WSF (polished) version as a surprisingly striking little glow bulb if you shine a light inside it, and possibly using the (pleasantly hefty) stainless steel version as an imposing game board piece.


To the customer who recently ordered this in Antique Bronze Matte, we would love to hear from you as to how your order turns out! Please consider sharing a photo or your thoughts on it if you find the time. :)
 
(9)  
  •  
From: $6.53
 
by Martynas
Rat earrings.
Tested in stainless steel. The earrings are heavy and the hook is thick, but they are suitable for wearing and are easier to put on than their strong and flexible material version. The hooks on the ones in the photos are slightly polished so they are a bit different from what comes straight from Shapeways.
Please feel free to download and use this model any way you wish.

CC0
To the extent possible under law, Martynas has waived all copyright and related or neighboring rights to Rat Earings.

 
(8)  
  •  
From: $5.95
 
by wpagnes82828
for iphone 4/4s. The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure. The case is stylish and in the same time heat eliminated.
 
(9)  
  •  
From: $13.21
 
by Gilbert13
"Kardia" Heart Pendant displays the anatomical beauty of the heart in all its glory. Can be used as a necklace or as a keyring. Please note the pendant is sold without the chain and the pendant shown is produced in Gold Plated Matte.
 
(3)  
  •  
From: $47.31