by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
schreerdesign
(Note, prices reduced) This is a sound magnifier for your iPhone 4 or 4s (does not fit others), based on the old Gramophones of the late 19th and early 20th Centuries. NOTE: BASE AND HORN ARE NOW SOLD SEPARATELY FOR TECHNICAL REASON. THIS FILE IS THE BASE ONLY. SEE THIS LINK FOR THE HORN: http://shpws.me/5i0B . (Adding this to cart will add both)
+ 
Want to get a set?
+ 
by
boustalahit
"I feel like I could.... LIKE I COULD.... take over the world !!"
This figurine is a fan art inspired by the great game "Day of the Tentacles" back in the nineties. The character shown is the evil purple tentacle who has drunk some toxic waste : as a result, two arms and a bad mood about humans...
I really recommand you the game if you find it somewhere (it's a collector now).
Please note that I don't do any markup on the price. I'd love your comment on your order too :)
by
thehumanhive
A tribute to papercraft artist Haruki Nakamura's sculpture, Gear's Heart. The assembled heart measures 8.5 cm in height (8.5 cm x 8.2 cm x 5.1 cm).
by
Ammnra
Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
by
COVO
Product Name "Keyboard Ring". Designed by Japan.
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
noesis
3D-printed metal Swan Station Failsafe Key just like Desmond's from LOST.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
by
andrew simpson
3d printed sunglasses.
design is based on a pair worn by marcello mastroianni in 8 1/2.
you will also need to buy the marcello pins along with the frames (http://www.shapeways.com/model/415223/marcello_pins.html?gid=ug47969)
by
printedCat
This model needs some post production assemble.
Please, watch the attached video and key moments of assembling process.
Replica of Wooden splinter Bird of Happiness
Bird of Happiness is the traditional North Russian wooden toy, carved in the shape of a bird. It was invented by Pomors, the inhabitants of the coasts of the White and Barents Seas. The Bird of Happiness is made without glue or other fasteners, by carving thin petals for the bird’s wings and tail and then using a special method of spreading and curving them, also found in other products of the North Russian handicraft. The amulet is usually made of pine, fir, spruce, or Siberian cedar. It is suspended inside a house, guarding the family hearth and well-being.
Source(s):
http://en.wikipedia.org/wiki/Bird_of_Happiness_(toy)
It is 16 cm in diameter
Please, watch the attached video and key moments of assembling process.
Replica of Wooden splinter Bird of Happiness
Bird of Happiness is the traditional North Russian wooden toy, carved in the shape of a bird. It was invented by Pomors, the inhabitants of the coasts of the White and Barents Seas. The Bird of Happiness is made without glue or other fasteners, by carving thin petals for the bird’s wings and tail and then using a special method of spreading and curving them, also found in other products of the North Russian handicraft. The amulet is usually made of pine, fir, spruce, or Siberian cedar. It is suspended inside a house, guarding the family hearth and well-being.
Source(s):
http://en.wikipedia.org/wiki/Bird_of_Happiness_(toy)
It is 16 cm in diameter
by
robo3687
In celebration of the release of Assassin's Creed: Revelations on PS3 and Xbox 360, here is a pendant in the form of the logo of the Assassin's Brotherhood.
by
Luma3Dprint
This is fan art only.
by
zinnsoldat
A high resolution model of the original movie requisite. It is very exact modulated from sketches of the movie.
by
yotoen
The iconic glyph used to represent the "Vault" in the popular multi-platform video game "Borderlands". Wear it as a pendant or use it as a keychain.
by
HenryAlfredo
An eyecatching set of arabesque inspired earrings. Makes for a very classic modern look and definitely looks great in any material offered. Can also be worn as a pendant. In this case i suggest a brown or black leather strap looks most exquisite.
NOTE: You receive two pieces (one set).
Revised edition now printable in silver.
NOTE: You receive two pieces (one set).
Revised edition now printable in silver.
by
PeregrineStudios
"Wisdom, Courage, and Power."
Now you can wear the symbol of the ancient and powerful TriForce. Courage, Power, and Wisdom will unite at your call, as you rush to save Hyrule.
The bumped version can be found here.
Pictured chain not included in design. Plastic models will not be painted.
Now you can wear the symbol of the ancient and powerful TriForce. Courage, Power, and Wisdom will unite at your call, as you rush to save Hyrule.
The bumped version can be found here.
Pictured chain not included in design. Plastic models will not be painted.
by
boustalahit
"I feel like I could.... LIKE I COULD.... take over the world !!"
This figurine is a fan art inspired by the great game "Day of the Tentacles" back in the nineties. The character shown is the evil purple tentacle who has drunk some toxic waste : as a result, two arms and a bad mood about humans...
I really recommand you the game if you find it somewhere (it's a collector now).
Some people requested bigger prints of this two guys. Now it's 10cm high.
Please note that I don't do any markup on the price. I'd love your comment on your order too :)
by
HenryAlfredo
Arabesque tealight draws beautiful shades in your home decor. Is a perfect piece for your candle or wax tea light.
by
robo3687
In celebration of the release of Assassin's Creed: Revelations on PS3 and Xbox 360, here is a pendant in the form of the logo of Abstergo Industries, the modern day Templars.
by
paulelderdesign
"Prepare to be Judged!" Here is an offer of a lifetime and a first for my Shapeways. I am offering the Dredd bages as a custom job with Your name. The procedure is simple just contact me and I'll pop your name on and upload to a private URL on here for you to order.
This has been updated recently as I was sent photos of an apparent screen used prop by a friend in the industry. There is accurate beveling, sloping and font used for Dredd.
by
ptaczek
High fidelity Pointy Legacy Byte model. Kevin Flynn had two bytes similar to this one in his hideout: one in silver and one in gold color.
This model is approximately half the original size with guessed geometry and features a fine groove around the edges so you can polish the flat areas and color the edges with ease to achieve the perfect match.
Enjoy!
