A G1 Bombshell-style blaster for your Fansproject's Stormbomb. Includes 2 peg sizes, a 5mm for your Hasbro Transformers, and a 4mm for your Fansprojects figures.

  A filler piece for Universe Prowl. This version is able to be used as a booster pack in vehicle mode.

Version 1.0

This is the "Mitmitie" variant of the Dejector model. It is a extremely posable, 2 inch tall robot and it comes with 2 detachable blaster accessories which he can grasp in his hands. He can hold other compatible 3mm peg accessories as well.

By some odd quirk, he can fold up into a rough, disc-like shape...

This model has been successfully tested in Strong Flexible and Frosted Ultra Detail. Due to fragility issues with FUD, Strong Flexible material is recommended.

Radicon thread here.
Flickr gallery here.

So, apparently Vangelus mentioned on WTF@TFW, the idea of using PRID Ratchet as a basis for some Autorooper soldiers... and then someone mentioned this idea to me... the result? The Ratchetrooper head mod!

This is a replacement face/head piece for Prime Ratchet. To install, you'll need a small screwdriver to remove the existing screw in the back of Ratchet's head. The two pieces that form the majority of his head will then easily come away from the transparent blue section that forms his neck and light-piping. Slot this on in their place and you're done! It doesn't screw on, but hopefully will be tight enough to stay on by friction alone. If not, you'll need a drop of glue =)

Yes, to get this head looking straight ahead, you need to angle the neck part forward quite a bit. This was necessary because of the length of the piece that forms the eyes on the original figure, I had to angle it down so that it didn't result in thin walls. There's also no light-piping on this figure, due to Ratchet having tiny eyes and the 'rooper having a rather large visor! =P

It was previously not possible to fully retract the head for vehicle mode, although it was close enough. However, this latest version features some minor adjustments that make a LOT of difference. If you trim about 2mm or so off the end of the original figure's eye section (basically the actual eyes themselves), this piece will slide on far enough to allow the head to fully retract when transformed, and also pop back up when returning to 'bot mode =D

Happy army building folks!

And coming soon... alternate 'deployed' hand weapons... and hand-held weapons too...

"When you need proof that big things do actually come in small packages, you call Cartridge Robot Beast. The heavy-hitter of the Cartridge Robots, twin shoulder-mounted cannons augment Beast's powerful physique. Whether he's blasting away at foes from a distance, or up close smashing your face in, Beast is all about hitting hard every time. Of course, a diminutive stature does have its drawbacks. Beast isn't too quick on his feet, and distance running isn't what he was built for. Thankfully, he can quickly fold up into Cartridge mode for Soundwave to take him wherever he needs to be."

-

Cartridge Robot Beast is a transformable robot gorilla, designed for use with the Cybertron Soundwave/Universe Blaster figures. Beast transforms from a gorilla with 14 points of articulation to a cartridge form which stows inside the chest of Soundwave/Blaster. Included with Beast are two shoulder mounted cannons for added firepower.

-

Beast is recommended to be printed in any of the Strong and Flexible materials, or Frosted Detail/Frosted Ultra Detail.

--Blockhead's guns are here: http://www.shapeways.com/model/618627/blockhead-s-guns.html ---A custom legion class size figure. A little off-road a little muscle-car, Block head my not be the smartest bot around but there's no one better suited to get the word out to troops in remote locations.

Here's a kit that allows you to upgrade your Hegemon to have nicely sculpted leg covers. There's no longer a need to paint the clear plastic on the back of his legs black, buy these instead to get a G1 look! I recommend 'polished white strong and flexible' with some light sanding. Ensure the parts are well cleaned and free of powder! Mask the attachment points and spray with fast-drying grey primer. Next, paint with a semi-gloss black, fast-drying spray paint like Krylon. Finally, mask the 'ankle cuffs' using painters tape and spray with a medium metallic silver. Finish off the ankle ports with a small black detail on top using either offcuts from labels or a black paint marker.

Wheels available separately in store. Sanding needed to parts. This model transforms.

By Trent Troop and Alex Androski. A set of four makeshift weapons for action figures with 5mm peg-holes: Licenses to Kill - A pair of punch-gauntlets, forged from crowbars, license plates and scrap-iron, for the right and left hands. Engine Crasher - A v8 engine block ripped from its housing to serve as a flail. Comes on a length of functioning chain bolted to a 5mm piston-grip. Ignoble Foe - The head of a fallen robot enemy made useful again through the addition of a smokestack-grip. This set has been tested in white & flexible. Figures shown in the images are for display purposes only. Update 2/15/13 - Updated hammer handle for more stability.

Tiny but feisty, Tremble is a robot warrior ready to duke it out with bigger foes in a building toy battle! A 4.9mm port on Tremble's base allows him to fit on a standard peg with most "leading brand" building toys, and his 3mm grip claw will let you arm him with a wide array of miniatures armaments or tools. Tremble is made as a single unit for greater stability, so his pose is static.

##this set has been tested in Frosted Ultra Detail and fits fine on the intended figure. It requires a small amount of carving at the back in order to accommodate transformation though and the model will be updated shortly##

This is a replacement head for the Beast Hunters Cyberverse Bulk Head figure modeled after G1 Roadbuster. $if you plan on ordering multiple items of mine, contact me first and I can group them into a single order to save you a few dollars.$

This head is to turn Transformers Prime RID Bumblebee into GoldBug. It has been tested using FUD. Because of production of the ball joint is slightly loose but can be easily fixed with a little nail polish or paint. Enjoy!

This is an original transformation robot. It changes into a robot from a car. Size is about 70 mm in the time of a robot. It is the size which can play together with the TRANSFORMERS CYBERVERSE. 16 joints of the whole body can be moved.

New Chest piece to turn Energon Barricade or Classics Onslaught into a Classics style Ultra Magnus. Fits on back in Bruticus torso mode. This model has not yet been tested.