Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.

This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!

NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.

Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.

Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later. +

Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.

Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)

If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.

Conversion chart for ring sizes:

US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm

I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)

Interlocking gears in a steampunk theme. These standard sized gear dice will keep your game turning (figuratively speaking, they do not actually turn...)

With percentile die.

Case compatible with the Raspberry Pi computer. GPIO port access from the side of the case. Optionnal : led lightguides for design case V2. http://www.shapeways.com/model/576641/raspberry-pi-led-lightguides-for-design-case-v2.html More information on : http://freakyshape.com/portfolio/raspberry-pi-design-case-v2/

This is the PUPIL eye-tracking headset. It is part of the PUPIL project on code.google.com/p/pupil. This is the second tested public release of the hardware. Revision 012.

(As material we have tested all SLS-nylon versions from shapeways - they call it strong and flexible. We recommend white polished or black.

An assassin's ring with a gap in the bottom to activate a hidden blade. The ring itself is about 20.98mm wide, that should translate to 11 1/2 ring size in the US.

Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.

Vambrace rotates to reveal hidden blade design on band.

US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide

Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12

Two Part Ring based on Portal 2 GLaDOS.

SIZE 6

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black

Click for Size 6.5 White
Click for Size 6.5 Black

Click for Size 7 White
Click for Size 7 Black

Click for Size 7.5 White
Click for Size 7.5 Black

Click for Size 8 White
Click for Size 8 Black

Click for Size 8.5 White
Click for Size 8.5 Black

Click for Size 9 White
Click for Size 9 Black

Click for Size 9.5 White
Click for Size 9.5 Black

Click for Size 10 White
Click for Size 10 Black

Click for Size 10.5 White
Click for Size 10.5 Black

Click for Size 11 White
Click for Size 11 Black

Click for Size 11.5 White
Click for Size 11.5 Black

Click for Size 12 White
Click for Size 12 Black

Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.

You can customize the size (inner diameter) up to 18.2 mm. If you need a bigger one, please do not use this CoCreator but send me a message instead ! I will list it.
Ring on picture is printed in Stainless Steel.

Product Name "Ring of the gamer". Designed by Japan.

Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.

The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.

Conversion chart for ring sizes

US Ring Size      Inside diameter
       8                         18.1mm
       9                         19.0mm
      10                        19.8mm
      11                        20.6mm
      12                        21.4mm
      13                        22.2mm

Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma

FORMA Laboratory Facebook Page!

Companion Cube storage box

Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!

From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!

If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?

The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)

Please also check out other products on my store and do not hesitate to contact me if you have any questions!

All models
A low profile case for the Raspberry Pi with sloped edges. Large open logo so the pcb board is visible and an open bottom frame with LEGO feet. The pcb board is clicked in the bottom part. The USB connector will stick out the front.
Along the side of the GPIO connector there are some holes, so it is easy to cut out, in order to get a flatcable out.
Case consist of 1.4 mm walls which makes it more expensive but is far more solid
It fits my production RPi perfectly. There still can small variations depending on the placement of the components. If you would like to purchase this, please note that if it does not fit, understand that I cannot and won't give a refund. Minor adjustments can be done with an exacto knife if it doesn't fit exactly.

Do you know the Companion cube? Well this is the companion dice!

Novelty 1-sided die. It's a mobius strip with a couple 1's embossed on it. I can't think of any real use for it, but - hey - you know it would be fun to add this one to your collection!

This listing is for one die (not a pair) And for the die with numbers on it. For a pair order 2! Thanks!

Take the traditional Jacks game to a whole new level. These standard sized Jack dice feel amazing in your hand and roll even better.

With percentile die.

• 32 faceted die • Design based upon the geometry of the Truncated Icosahedron, a.k.a. the Soccer Ball • Hexagonal faces numbered 1 to 20; Pentagonal faces numbered 21 to 32 • Uses the same original construction algorithm as the popular ICODIE and the Dodclock Die • A related design that can be worn as a Pendant
*******************
See other Soccer Ball (A.K.A. Truncated Icosidodecahedron) related designs here:
Soccer Ball Ring
Soccer Ball Earrings
Soccer Ball with Roosevelt Island Tram inside
Soccer Ball Pendant
Soccer Ball with American Football Inside #1
Soccer Ball with American Football Inside #2
Soccer Ball Pendant /Keyring
Dutch Shoe Inside Soccer Ball #1
Soccer Ball with Dutch Soccer Shoe Inside
Peace Ball
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

Stepped Die - a D6 die (dice) with stepped corners.
18mm sides with 7mm tall numbers and 1mm stepping.

See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 for a D12 featuring stepping under the center of the numbers.

This was a personal project, not meant for anyone to want to order, except maybe friends. The body mostly intersects with the frame and name, giving it strength to carry around.

I figure it's a pretty neat color print, so I'll leave it so you guys can see photos of it. For the size, the cost was very cheap considering size. The frame has a thickness of a pencil and is solid. Parts of the body and tail are hollow.

No mark-up since this is mostly for friends