DarioScapittaDesign
I like create something that people like to wear every day or for a special moment. I love to see this people smiling wearing a my object.
Expertise:
- 3D modeler
- Designer
- Product designer
by
MichielCornelissen
Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
by
VapourStudios
Nanolet
Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.
The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.
Featured on: Mashable , Cult of Mac , Yanko Design and many more.
Suitable for medium sized wrists. Available in a range of colors
Medium is for a wrist of circumference 165mm - 185mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. Maximum wrist size is 190mm.
Unboxing Video here
Click here for OTHER SIZES
Click here to visit our site
Or click here to keep up to date on Facebook
Interested in buying Nanolets in BULK at reduced price? For LARGE , MEDIUM and SMALL
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
chromoly
The Road Popper is a bike-mounted bottle opener that we developed for our own use and decided afterward to share. We designed it to fasten discreetly to the rails on the underside of the saddle to help keep your bike looking crisp. So far, it's worked on all the bottle caps we've tried it on. Material options are bronze infused stainless steel. Finish options are plain (on the right in the photograph), matte gold, glossy gold, matte antique bronze, and glossy antique bronze. The Road Popper is not intended for alcoholic beverages. Chromoly does not condone cycling while under the influence of alcohol.
Things You'll Need for Installation (not included with purchase)
2 - 3/8” long #6 flat head (countersunk) screws
2 - Nylon locknuts
1 - Screwdriver
1 - Needle nose pliers
Bike Requirements
Conventional bike saddle. If you're not sure if your seat is standard or not, give it a measure. The rails should be 7 mm's (0.275 inch) in diameter and roughly 44mm's (1.73 inch) apart.
At least 228mm's (9”) of space between the underside of your seat and your tire.
9mm's (3/8”) of open rail behind where the seat attaches to the seat post.
*Because this product is fabricated to order it is more expensive that it would be under normal manufacturing conditions. For this same reason it takes about 14 working days to arrive. The cost of shipping (via UPS) is included in the list price. Please note that duties and taxes may be applied to your order when it enters your country.
Things You'll Need for Installation (not included with purchase)
2 - 3/8” long #6 flat head (countersunk) screws
2 - Nylon locknuts
1 - Screwdriver
1 - Needle nose pliers
Bike Requirements
Conventional bike saddle. If you're not sure if your seat is standard or not, give it a measure. The rails should be 7 mm's (0.275 inch) in diameter and roughly 44mm's (1.73 inch) apart.
At least 228mm's (9”) of space between the underside of your seat and your tire.
9mm's (3/8”) of open rail behind where the seat attaches to the seat post.
*Because this product is fabricated to order it is more expensive that it would be under normal manufacturing conditions. For this same reason it takes about 14 working days to arrive. The cost of shipping (via UPS) is included in the list price. Please note that duties and taxes may be applied to your order when it enters your country.
by
tomorrowlab
Solo e Sola is an espresso cup that holds a single cigarette.
The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.
A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.
by
virtox
A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
electrobloom
SNAP BANGLE.
The Snap Bangle can be worn on its own or customised with any of the charms. Available in a range of colours. Simply attach your chosen charm onto the bangle and pop it onto your wrist. Secured by inserting the tail into the head and squeezing closed. Adjusts from approx 55mm-65mm across the internal
Remember to order a charm or two to customise your bangle.
Two Snap Bangles can be connected together and twisted for a completely new look, see the image above for details.
Looks great on both men & girls.
Watch the video which explains how the bangle works, and have fun customising your own.
The Snap Bangle can be worn on its own or customised with any of the charms. Available in a range of colours. Simply attach your chosen charm onto the bangle and pop it onto your wrist. Secured by inserting the tail into the head and squeezing closed. Adjusts from approx 55mm-65mm across the internal
Remember to order a charm or two to customise your bangle.
Two Snap Bangles can be connected together and twisted for a completely new look, see the image above for details.
Looks great on both men & girls.
Watch the video which explains how the bangle works, and have fun customising your own.
by
RemivanOers
CLIP-IT for iPhone
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
Your charge buddy on the go.
Clip-it for iPhone converts your Euro iPhone charger to a wall dock; making sure that you can easily charge your phone at every wall socket. Unfurnished rooms, hotels and conference rooms are no longer a problem.
Clip-it lets you wind the usb cable easily around your charger while taking it with you.
Clip-it makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and lock the cable at the bottom. Clip-it is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
Clip-it is designed for the iPhone 4 & iPhone 4S and the included Apple USB Power Adapter (European version).
After all the excitement, an US version of Clip-it is available here!
Clip-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. When you ordered Clip-it in colour it might be wise to clean it with water under the tap, so the dyeing pigments that might still be on the product don’t colour your white Apple gadgets. For further information & support contact the Shapeways customer service.
by
kevinweinewyork
A wide bangle made of solid sterling silver. Pointed flower motifs make up a three-dimensional lattice that wraps around a mysterious internal space. Appears delicate, but functions with uncanny strength. Also available from my shop: www.kevinwei.com
by
MichaelMueller
This is a full working tabacco pipe. The head is made with glazed ceramics, the mouthpiece is antique bronze glossy.
+ 
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
+
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
Eragatory
Cutlery refers to any hand implement used in preparing, serving, and especially eating food.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.
Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.
by
rustylab
"Peep" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love.
***The chain is not included in the delivery.
by
RemivanOers
NANO DOCK:
Dock your iPod Nano 6G and give it a spot on your desk, cabinet or nightstand.
The Nano dock holds, syncs and charges your iPod Nano to prepare it for your next musical journey. Nano dock also transforms your Nano to an elegant table clock. See the time at your work desk or use it in the kitchen to perfect cook your egg with the Nano’s build in timer function.
The Nano dock makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and pull the cable through the back. The Nano dock is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
The Nano dock is designed for the iPod Nano 6G, but may work with older iPod models as well.
It’s time to elegantly dock your Nano.
(To fully function your Nano as a clock; activate the ‘show clock after wake’ function in the settings).
Nano dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
Dock your iPod Nano 6G and give it a spot on your desk, cabinet or nightstand.
The Nano dock holds, syncs and charges your iPod Nano to prepare it for your next musical journey. Nano dock also transforms your Nano to an elegant table clock. See the time at your work desk or use it in the kitchen to perfect cook your egg with the Nano’s build in timer function.
The Nano dock makes use of your existing Apple Dock Connector to USB Cable. Simply snap it in and pull the cable through the back. The Nano dock is perfectly engineered to hold the latest two generations of original 30 pin Apple charging cables.
The Nano dock is designed for the iPod Nano 6G, but may work with older iPod models as well.
It’s time to elegantly dock your Nano.
(To fully function your Nano as a clock; activate the ‘show clock after wake’ function in the settings).
Nano dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.
by
Eragatory
Blue version also available
Green version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
Green version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
by
SGDesigns
Cheshire Cat ring inspired by Alice In Wonderland.
This ring is made thick and chambered for a better fit.
Engraved on the inside of the ring it says "We're all mad here.."
Ring size: 8.5
I will be adding more sizes soon. Feel free to email me for a specific size.
More sizes available below
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 11
Size 12
Size 13
by
unellenu
'Woven Flower' 3D fractal model. This sculptural design has a loop at the top so that you can hang it up as a room decoration.
View a youtube video of this design, or scroll down to see the embedded video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model#101218_woven_21C_1.5_0.7mm
View a youtube video of this design, or scroll down to see the embedded video below.
The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model#101218_woven_21C_1.5_0.7mm
by
SheilaMunro
Beautifully detailed 2.2 inch-long Raven Pendant. looks amazing in silver! :) The picture above is an actual photograph. :) Successfully printed in a variety of materials including Antique Bronze Matte. Thickness of the bars are approximately 1.5 mm. Available for the low-price of $29.99 in Antique Bronze only on Shapeways!
by
i8kermit
It's a Cufflink! It's a button! It's both! And it holds your sleeve shut to boot!
NOTE: These DO NOT come with thread in the holes (as you can see in the 3D file viewer). I did that after to add a little flair, and it's super easy to do. I'd be happy to help you with the process. For more on my designs or to contact me, visit www.prero.com.
ALSO NOTE: The "GP" on the back has changed in the most recent file. Aside form that it's the same.
by
josmar
Outline Chess - Pawn
Available in;
White Strong & Flexible
Black Strong & Flexible
Available in;
White Strong & Flexible
Black Strong & Flexible
by
rustylab
"Kitty cat" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love.
***The chain is not included in the delivery.
by
MichaelMueller
A clean and simple pendant based on the geometric form of a crystal.
Crystals exist in astonishing forms and colors. For me, they are one of natures greatest masterpieces.
Crystals exist in astonishing forms and colors. For me, they are one of natures greatest masterpieces.
by
alaswadi
A beautiful but not edible gold fish pendant.
Necklace not included.
by
kevinweinewyork
An offset teardrop pendant made of solid sterling silver. Angular chrysanthemum motifs make up a network of interlocking mirrored plates and engraved lines. Appears wonderfully complex and intricate, and is even more impressive in person.
*NOTE: Pendant with silver lines available from Shapeways. Pendant with black oxidized lines and chain available from my shop: www.kevinwei.com
by
kevinweinewyork
A ball pendant made of solid sterling silver. Rounded flower motifs make up a three-dimensional lattice that wraps around a mysterious internal space. Appears delicate, but functions with uncanny strength.
*NOTE: Pendant available from Shapeways. Pendant and chain available from my shop: www.kevinwei.com
by
SheilaMunro
Detailed Tibetan Sugar Skull design, 1.5mm thickness.
by
Dyvsign
‘La Gerbe’ is inspired by the eponymous work of Matisse and is printed in a nylon powder.
One of the techniques used by the French artist Henri Matisse was the cutting out of organic forms using colored paper (cut out technique) and laying them in such a way to form a vivid composition. ‘La Gerbe’ from 1953 is a good example and was his last great work before he died.
A few years earlier, in the town of Vence in the south of France, the ‘Chapelle du Saint-Marie Rosaire’ was built. Matisse designed most of this chapel. The structure, furnishings, wall hangings, the clothing of the priest and the stained glass windows. These windows clearly demonstrate his cut out technique, and the colors that he used in them are symbols of the surrounds where the chapel stands. The cobalt blue symbolizes not only Maria, but also the Mediterranean Sea and the ever blue sky of southern France. The yellow stands for the sun and the green for the ever present green in nature.
The bracelet from the 3D printer is inspired using this cut out technique from Matisse and shows the recognizable cut leaves and the vivid style in which they are positioned.
Please Note: when ordered via Shapeways you'll get the bracelet in white.
by
TheRogueAndTheWolf
A solid Sterling Silver Cat Skull ring to adorn your hands. Induces acute independence.
Available in various sizes. Feel free to contact us for any custom sizes and we’ll make it happen.
Most of our designs are in stock and ready to dispatch at The Rogue + The Wolf Etsy shop, so pop in and have a look if you are in a hurry.
Make sure to visit our new The Rogue + The Wolf website.
by
rustylab
"Doll" is a series of pendants. The parts are designed to be fully movable. It makes a great gift to yourself or to someone you really like or love.
Detail:
By turning the head you can switch to a different face/mood.
***The chain is not included in the delivery.
by
MichaelMueller
Who ever started saying "diamonds are the girls best friend" was certainly ...
A: a girl, B: a jeweler or C: damned rich.
Try this pendant instead! OK, it's not a real diamond, but hey, it's the attitude that matters.
This pendant comes without necklace!
A: a girl, B: a jeweler or C: damned rich.
Try this pendant instead! OK, it's not a real diamond, but hey, it's the attitude that matters.
This pendant comes without necklace!
by
Eragatory
Blue version also available
Pink version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
Pink version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
by
Eragatory
this piece is MEN MEDIUM sized
size Men SMALL also available
size Men LARGE also available
Not sure which size you need? Check out my Sizing Chart
An intricate bracelet, revolving around "Memento Mori", which is an artistic theme dating back to antiquity involving morbid symbolism. In this case, covered by digital aesthetics and contemporary production techniques.
The 925 Sterling Silver C-shaped design fits close to the skin. The final product is made using a two-step process. The products are created with a lost-wax casting process using a high-resolution 3D wax printer. After printing the wax model, the wax model is cast in plastic. The wax then melts out and silver is poured in the plaster mold.
Silver is very suitable for this bracelet since it is very strong yet allows some flexibility. If the bracelet would not fit totally according to your wrist you will still be able to make some final adjustments depending on the wanted opening, just as you would do with any other silver jewelry.
size Men SMALL also available
size Men LARGE also available
Not sure which size you need? Check out my Sizing Chart
An intricate bracelet, revolving around "Memento Mori", which is an artistic theme dating back to antiquity involving morbid symbolism. In this case, covered by digital aesthetics and contemporary production techniques.
The 925 Sterling Silver C-shaped design fits close to the skin. The final product is made using a two-step process. The products are created with a lost-wax casting process using a high-resolution 3D wax printer. After printing the wax model, the wax model is cast in plastic. The wax then melts out and silver is poured in the plaster mold.
Silver is very suitable for this bracelet since it is very strong yet allows some flexibility. If the bracelet would not fit totally according to your wrist you will still be able to make some final adjustments depending on the wanted opening, just as you would do with any other silver jewelry.
by
growthobjects
A design based on the observation of the giant Amazon water-lily seed. The pendant raises the power of seduction of natural shape.
by
dominikraskin
Order contains 1 pair of earrings without earhooks. Enjoy.
+ 
+ 
Want to get a set?
+ + 
by
Eragatory
Pink version also available
Green version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
Green version also available
This design balances on the edge in-between functionality, digital aesthetics, mass customisation and object Oriented Eclecticism. In contrast to contemporary thought and design, which views things as the aggregation or assembly of smaller bits and parts, in Object Oriented Design new objects emerge out of an ecology of interaction of multiple and heterogeneous objects. Through a process of formation or computation, highly differentiated, contradictory concepts and structures can become one object, without resulting in an incongruous collage.
The use of contemporary production techniques as 3d printing offers this design a substantial relevance, since it is designed throughout a series of semi automated steps. This would enable the creation of several geometrical variations and color schemes for this design, with the advantage of being able to print out customised vases on demand. All slightly different in erosion type or formation. Always following the same design rules, production time and all for approximately the same price. Economically this makes a lot of sense since their would not be any overstock needed like in other production methods, where prices only go down depending on a large amount of produced items.
