this piece is size MEDIUM
size LARGE also available
not sure which size you need? check out our sizing chart

An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.

The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.

[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]

Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!

The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.

The 3D printed Strandbeest is sold separately.

A few tips to consider:

- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.

- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.

Make your own slide-on macro lens for the iPhone 4 or 4S. I designed this for my iPhone 4 when I couldn't find the image quality I wanted for less than $60.

Print this model and then buy the glass lens for $4 from Surplus Shed (http://www.surplusshed.com/). The Surplus Shed part number is L4471. For some reason the search box on the Surplus Shed home page does not work with part numbers. To get to L4471, use the "Lens Finder". In the Lens Finder type:

Lens Type: PCX, Plano Convex
Diameter: 12mm to 12mm
Focal length: 51mm to 51mm

It will get you to L4471

The lens fits in a recess in the model and is held in place with a few tiny drops of Superglue. If you get any glue on the lens it can cleaned off with nail polish remover or acetone. The lens is plano-convex (one side is flat). When inserted in the holder, the flat side of the lens faces the phone.

Note that the lens fits pretty snugly into the opening. Try fitting the lens before applying any glue. A good technique is, with the lens holder laying face-down on a table, lay the lens in position, and then push it into the recess by poking the lens with the eraser-end of a pencil. Once you know the lens fits cleanly, push it back out and put two tiny drops of superglue on opposite edges of the opening. I use a toothpick to apply the glue because squeezing the superglue directly out of the tube risks putting on too much. Then push the lens back in the same way as in the test fit.

The object pictures in the photo gallery (dime, ruler, and watch) are unedited and uncropped shots directly from my iPhone4.

This model will not slide over iPhone cases.

Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.

This is the PUPIL eye-tracking headset. It is part of the PUPIL project on code.google.com/p/pupil. This is the second tested public release of the hardware. Revision 012.

(As material we have tested all SLS-nylon versions from shapeways - they call it strong and flexible. We recommend white polished or black.

Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))

Two piece puzzle ring.
Inner diameter 19mm.
NOTE: This is prototyped only in plastic. Tolerances may not work in metal.

Upload your image and we will print it on this attachment for a lighter. The image will be scaled to a maximum of 2 by 2 cm.

- Lighter sold separately.
- The Lighter is a Cricket Electronic.
- Original lighter metal needs to be removed first.

If you are looking for a version that fits a different lighter go here: http://www.shapeways.com/model/111548/

*Please don not mirror your attachment, we will do this for you.

Now you can bring home 3D Printing in style.

3D Photo Frame
is manufactured in strong and flexible polyamide, using SLS (or Selective Laser Sintering) 3D printing technology. That's right, each 3D Photo Frame is produced in a machine by printing a digital file layer by layer into a physical object especially for you. This unique manufacturing process makes possible to create the 3D Photo Frame in a single piece without the need to assemble. It also enables to produce the 3D Photo Frame in demand, so it is manufactured only when you buy it and delivered directly to your home. It is made to support photo size 102x152 mm (4x6 inches).

Colors
are always available in white and black, plus Shapeways seasonal colors.

* Due the material's flexibility, it is advised to use 2 support points in each end, rather than 1 in the middle to keep the straight line look

Designed by using particle systems in 3D CAD software this bracelet is now available in its final form. Threads visible here are about 1mm thick.
This version of bracelet is in cuff form, designed to flex into various sizes and to fit and wrap around your wrist.

This is the second and much improved version of my single-piece prybar and nail lifting tool with a range of metric hex drivers (5.5, 6, 7 and 8mm), a bottle opener, a 1/4" hex bit holder and two 1/4" hex driver points.
The centre cut-out will hold and store a standard PH2 or PZ2 25mm long quarter inch hex bit (not included).
Four o-rings are required to complete the assembly (10mm ID, 2.5mm diameter, not included)

This model is designed to be printed in Stainless Steel or one of it's variants.
I've been carrying this prybar around with my keys for a while now and it's functionality is just as i'd hoped with it not having let me down so far.
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 5.5mm hex hole.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.

Toy car moves through air release of inflated balloon. Watch video above. Balloon not included (all medium size balloons fit).

Yet another Batman inspired ring. But this one has ears! Don't hurt anyone. But if you do, don't sue me. It's not my fault. For custom engravings on the inside, contact me.

No two snowflakes are ever the same ... and this one just happens to look like He-Man! This design is based on the 80's action figure.

Two letters fused into a single block – what an eye-catching way to showcase initials! Yes, it's like the cover of Gödel, Escher, Bach. Yours will be 2-3" (5-7cm) tall depending on which letters
Choose from Comic, Typewriter, Block or Script font, as shown in the second picture above.
A smaller size is here.

Do three letters work? Sometimes, find out more here.