by
stop4stuff
This pendant features a mobius style spiral that can enclose a 6mm ball which jingles and jangles when worn.
If you'd prefer a right hand spiral, please see; http://www.shapeways.com/model/169011
NOTE:
Shapeways have decided that this model is unprintable with the ball enclosed.
This model will take a 6mm steel ball which can be fitted by gently forcing open the spiral... see video.
A 5mm ball is available here; http://www.shapeways.com/model/172759 or simply use a suitable (4.5mm-6mm) ball bearing.
If you'd prefer a right hand spiral, please see; http://www.shapeways.com/model/169011
NOTE:
Shapeways have decided that this model is unprintable with the ball enclosed.
This model will take a 6mm steel ball which can be fitted by gently forcing open the spiral... see video.
A 5mm ball is available here; http://www.shapeways.com/model/172759 or simply use a suitable (4.5mm-6mm) ball bearing.
by
Oskar_van_Deventer
Minimal Twist is a twisty puzzle, related to the Rubik's Cube. It is a very minimalistic, skeletal design,even without stickers. The parts are held together by dovetail connections.The puzzle has the geometry of the Skewb puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored and assembled sample of this puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored and assembled sample of this puzzle.
by
gibell
Stewart Coffin's Peanut Puzzle, modified by starting from 2.5cm (about 1 inch) diameter spheres. The six pieces are all different. This puzzle assembles into many different shapes, shown in the photos. Interestingly, in the wood version of this puzzle, the "Triangle" shape is impossible to constuct - but using spheres, it is possible.
The pieces will fit tightly out of the box. I recommend scrubbing them with a toothbrush in soapy water for a perfect fit. One finishing technique is to dye each piece a different color.
The pieces will fit tightly out of the box. I recommend scrubbing them with a toothbrush in soapy water for a perfect fit. One finishing technique is to dye each piece a different color.
by
Oskar_van_Deventer
Alex Black Hole is based on a sliding-cube idea by Alex Polonsky. There are seven cubes around a sphere with grooves. The object is to scramble the puzzle by sliding the cubes, and then solve the puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored and assembled sample of this puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored and assembled sample of this puzzle.
by
stop4stuff
Stiched Mobius - a mobius strip pendant featuring a never ending 'running' stitch.
by
Oskar_van_Deventer
Moby Maze is a mechanical maze based on a Mobius Strip. Half of the maze is at one side, the other half is, well, at the same side. The object is to remove the ring. It was originally prototyped by George Miller of PuzzlePalace.com.
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Non-Twisty Puzzles Forum.
Please contact Oskar directly if you are interested in obtaining a two-color dyed sample of this puzzle.
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Non-Twisty Puzzles Forum.
Please contact Oskar directly if you are interested in obtaining a two-color dyed sample of this puzzle.
by
Oskar_van_Deventer
Dino Cube is a classic cube design from the 1980's, designed by ...
Watch the YouTube video.
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
Watch the YouTube video.
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
by
flypig
A Celtic knot object generated as a three dimensional knot constrained within a cube.
The knot is made up of 14 looped paths that intertwine to create a single object. The pattern uses the same general set of mathematical rules as traditional two dimensional celtic knotwork, but generatised into the third dimension.
The model has been successfully printed and feels quite sturdy using white strong & flexible. The diameter of each piece of 'string' is 3mm and the model is just under 8cm along each edge.
The knot is made up of 14 looped paths that intertwine to create a single object. The pattern uses the same general set of mathematical rules as traditional two dimensional celtic knotwork, but generatised into the third dimension.
The model has been successfully printed and feels quite sturdy using white strong & flexible. The diameter of each piece of 'string' is 3mm and the model is just under 8cm along each edge.
by
Oskar_van_Deventer
PantaBram is Bram Cohen's variation to PantaCube, which is Oskar's variation to Pantazis Houlis' Cubedron. The puzzles has five pyramids that slide through grooves around a sphere. The groove pattern is an ultra-simple maze, suggested by Bram. Because of this maze, pieces can slide only one at a time (unlike regular twisty puzzles). This puzzles is very hard to solve, despite its low number of pieces.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
