Phamora Ceramics!

Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!

A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.

Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.


Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.

Two Part Ring based on Portal 2 GLaDOS.

SIZE 6

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black

Click for Size 6.5 White
Click for Size 6.5 Black

Click for Size 7 White
Click for Size 7 Black

Click for Size 7.5 White
Click for Size 7.5 Black

Click for Size 8 White
Click for Size 8 Black

Click for Size 8.5 White
Click for Size 8.5 Black

Click for Size 9 White
Click for Size 9 Black

Click for Size 9.5 White
Click for Size 9.5 Black

Click for Size 10 White
Click for Size 10 Black

Click for Size 10.5 White
Click for Size 10.5 Black

Click for Size 11 White
Click for Size 11 Black

Click for Size 11.5 White
Click for Size 11.5 Black

Click for Size 12 White
Click for Size 12 Black

Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.

10g


Though these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.

These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.

This piece of art was created in 3D software by "printedCat" 3D-designer in San Francisco, California, USA and printed in nylon material by Shapeways.com in Holland or New York.

Enjoy watching!

All images are photos of real objects. "Proof Printed".

printedCat on Shapeways
printedCat.com
printedCat on Flickr
printedCat on YouTube
printedCat on Etsy
printedCat on Facebook

Intricate Skull Cage, successfully printed in WSF & Antique Bronze. Available for the low price of $39.99 only on Shapeways during the Holiday season. :)

Companion Cube storage box

Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!

From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!

If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?

The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)

Please also check out other products on my store and do not hesitate to contact me if you have any questions!

This little guy is a fox and proud of it.

This incarnation is best suited to use as a decorative object, but we're open to suggestions for how you'd like to see it modified for your use!

The two most interesting uses we've found so far are using the WSF (polished) version as a surprisingly striking little glow bulb if you shine a light inside it, and possibly using the (pleasantly hefty) stainless steel version as an imposing game board piece.


To the customer who recently ordered this in Antique Bronze Matte, we would love to hear from you as to how your order turns out! Please consider sharing a photo or your thoughts on it if you find the time. :)