ChristianA
Product Manager @Shapeways. Planning as objectively as possible, everyday.
Expertise:
- Maker
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
QUATRO
Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
GothamSmith
Mustache Cufflinks in the double mustache style.
by
barbecuesteve
This adapter holds your Apple "MagSafe to MagSafe 2 Adapter" snugly and hooks to your power adapter's cord. For that power adapter that is used to serve both old and new Macs!
by
virtox
A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
by
thehiddenice
Each badge is about 1.25 x 1.25 x .25. If anyone is interested in Individual badges, let me know and I'll upload them separately.
More badges to come.
by
cunicode
one cup a day
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
Day 09: Low Resolution Cup
30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
by
MichaelMueller
Harr, harr, pirate stuff.
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
by
joabaldwin
Low polygon Cloud Strife from Final Fantasy 7. I modeled him identical to the original low poly you see in the FF7 videogame (not the cutscenes version or fights version, but the playable, big headed one you actually control).
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
by
wpagnes82828
for iphone 4/4s.
The hollowed case in combination with the contract color of the iphone itself gives a vivid animal figure.
The case is stylish and in the same time heat eliminated.
by
colleenjordan
A planter for your bike! Make your green form of transportation even greener.
Works great with small potted plants and flowers, and even large air plants. Encourage yourself to ride your bike more by giving your plant some sunlight. This will guarantee that you will have the coolest bike at the bike rack.
Part of my wearable planter series, shown here printed in blue ABS, the same material as Shapeways' Grey Robust.
This model is sold from Shapeways, and is only the 3d printed piece. You'll have to add your own cord, and directions are available here.
by
Kidmechano
ModiRaptor is the scourge of the ModiBot universe and 47 parts of poseable madness. Highly articulated tail and body. Vice-like jaws and 12 moving claws. Compatible with ModiBot hex-fit figures and accessories. What can you imagine and build with these parts? Here is a download link for an Instructions- https://www.dropbox.com/sh/s4vil011e6yh916/B6w8_cOWDB
by
HenrikRydberg
Turn your fridge door into a growing habitat for herbs, flowers, cactuses and other small plants. Let life animate your inanimate surfaces. Glue three small round magnets (0.750" x 0.125" or 20mm x 3mm) at the bottom to make the planter stick to your fridge.
Get the magnets from http://amzn.to/W6tj4A and
super glue from http://amzn.to/Y2sH05
by
seedlingdesign
Order this ring base to make your own glass dome rings! The possibilities are endless. Make a terrarium, fill it with herbs, insert miniature people etc... You can purchase the glass domes from:
http://www.etsy.com/shop/pdhartman?ref=pr_shop_more
and search for:
Tiny Miniature Glass Dome 7/8" High (No Base) D5
Note: the glass domes aren't always the exact dimension, so some might not fit without a little sanding.
Make this a fun DIY project!
by
cunicode
one cup a day
Day 02: Studded Belt Cup
30 days, 30 coffee cups project
View the collection
Day 02: Studded Belt Cup
30 days, 30 coffee cups project
View the collection
3D Print in Ceramics vs. 3D Model
review & details
by
dotdotdot
Yearn to be nostalgically walking around town chatting madly into your favourite childhood toy?
Of course you do!
Introducing the BRICKS iPhone 4 and iPhone 4s case by dotdotdot. Now your most popular plastic bricks and men will click into place giving you infinite possibilities and a certain crazed panache as you step onto the bus in the morning.
Who said we ever had to grow up?
Of course you do!
Introducing the BRICKS iPhone 4 and iPhone 4s case by dotdotdot. Now your most popular plastic bricks and men will click into place giving you infinite possibilities and a certain crazed panache as you step onto the bus in the morning.
Who said we ever had to grow up?
by
sevensheaven
Mario also has his bad days. :) Now you can own this unique pop art piece of Mario eaten by a Piranha plant on your desk. After all, enjoying the jealousy of your friends and relatives for a long time to come is priceless.
by
bramgeenen
The Gaudi Chair is the follow-up of the Gaudi Stool which was created in 2009. It was designed using the same method as Antoni Gaudi, who made models of hanging chains, that upside-down showed him the strongest shape for his churches. Additionally, to be able to determine the structure of the chair's backrest, a software script was used.
The script was based on three steps: First the distribution of forces across the surface of the chair. Secondly the direction of forces defined the direction of the ribs. Finally the amount of force specified the height of a rib.
Materials and techniques were chosen to create a lightweight chair. The surface is of carbonfiber, the ribs are made of glass-filled nylon, by selective laser sintering.
The project researches how new technoloqy can be based on simple, logical concepts. In this case a concept which has proven it's strength and beauty for over a hundred years.
The script was based on three steps: First the distribution of forces across the surface of the chair. Secondly the direction of forces defined the direction of the ribs. Finally the amount of force specified the height of a rib.
Materials and techniques were chosen to create a lightweight chair. The surface is of carbonfiber, the ribs are made of glass-filled nylon, by selective laser sintering.
The project researches how new technoloqy can be based on simple, logical concepts. In this case a concept which has proven it's strength and beauty for over a hundred years.
by
thekarolina
Large ampersand-shaped cutter for play-doh, clay, etc.
The typeface is Arbutus Slab, the regular weight of which is currently available for use and download on Google webfonts.
PLEASE NOTE: Ceramic is the only material available on Shapeways that is certified as food-safe. For any other material (such as White Strong & Flexible, pictured), USE AT OWN RISK.
Model made with Tinkercad.
The typeface is Arbutus Slab, the regular weight of which is currently available for use and download on Google webfonts.
PLEASE NOTE: Ceramic is the only material available on Shapeways that is certified as food-safe. For any other material (such as White Strong & Flexible, pictured), USE AT OWN RISK.
Model made with Tinkercad.
by
printedCat
All photos are real models printed on 3D Printer in Nylon (WSF)
Models were designed exclusively for 3d printing using Zbrush4.2
PrintedCat on Shapeways
PrintedCat.com
Photostream on Flickr
PrintedCat channel on youtube
PrintedCat on Etsy
Models were designed exclusively for 3d printing using Zbrush4.2
PrintedCat on Shapeways
PrintedCat.com
Photostream on Flickr
PrintedCat channel on youtube
PrintedCat on Etsy
by
mygadgetlife
Forget the dull old building pass holder you carry with you today, go post-modern and get yourself a Portal inspired badge carrier instead!
Designed to hold a standard credit card sized ID card.
Designed to hold a standard credit card sized ID card.
by
moloko
It has a really unusual look and feel, but it works great! It has especially thick walls to keep your espresso hot until it's gone.
by
JordivanEs
Leonardo Di Ser Piero, born in Vinci, Italy, was perhaps the first European with a practical solution to flight in ca. 1485. One of his early designs was an ornithopter powered by human muscle by pulling strings, one for each wing. Leonardo did find out fast he needed something else than human power. I replaced it for a crankshaft mechanism in miniature. It comes fully assembled!
Keep in mind if you actually throw the plane, it will crash. Its fan can't be wind-operated.
Keep in mind if you actually throw the plane, it will crash. Its fan can't be wind-operated.
by
roofoo
This sterling silver ring is inspired by the VISOR worn by Geordi LaForge in Star Trek: The Next Generation. Let your inner trekkie shine. :)
Default size is US 9, but sizes from 8 - 12 are possible at this time.
For a version with gold plated accents, please see my Etsy listing. https://www.etsy.com/listing/129697840/star-trek-tng-geordi-laforge-visor-ring
by
mught
Stainless steel or silver tie clip inspired on the video game Legend of Zelda.
ATTENTION:Some pictures have been painted with enamel. The Shapeways items will NOT be. You can find the enameled tie clip in my shop:
https://www.etsy.com/shop/TheLittleSaint
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
ATTENTION:Some pictures have been painted with enamel. The Shapeways items will NOT be. You can find the enameled tie clip in my shop:
https://www.etsy.com/shop/TheLittleSaint
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
by
TheRogueAndTheWolf
A Bison Head ring to adorn your hands. You will rule the prairies.
Available in various sizes. Feel free to contact us for any custom sizes and we’ll make it happen.
Most of our designs are in stock and ready to dispatch at The Rogue + The Wolf Etsy shop, so pop in and have a look if you are in a hurry.
Make sure to visit our new The Rogue + The Wolf website.
by
mught
Stainless steel or silver tie clip inspired on Luke Skywalker's light saber from Star Wars.
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
If you are looking for something specific don't be hesitate to write me and I will create it specially for you!
by
thenewhobbyist
When my fiance Melissa and I started planning our wedding last September we knew it wasn’t going to be cookie cutter. We decided to include some personal additions that we just couldn’t get elsewhere to make the day our own and at the same time save money.
Here’s one example. Instead of buying bouquets for the wedding we decided to use our combined talents to create something that was not only skirted the norm but would also last quite a long time. We combined 3D printed parts and crocheted flowers to create a rather unique bouquet for the bridesmaids.
Good for Valentines Day, birthdays, anniversarys, and who knows maybe even other Maker weddings.
by
Brickley
1:1 Lego, driver not included. Mercedes logo's. Hollow, wall thickness 1,5mm (Lego Technic standard). Hollow tires and F1-rims...
by
schlem
If you have a Generation III Prius (2010-present) with 15 inch wheels, you can pop off the UGLY wheel covers to release the alloy beasts underneath. Except - you'll have a hole in the center of the wheel that begs for a decorative cap. These are based on precise measurements of Toyota part #42603-52110.
This has the iconic power symbol embossed in the top of the wheel cover, just like the power button in your Prius. More info: en.wikipedia.org/wiki/Power_symbol
Also fits Yaris, Vios
Photos: http://www.flickr.com/photos/theschlem/sets/72157632696775253/with/8449866372/
Nylon is NOT UV stable. For maximum longevity and downright good looks, you will want to paint this object. Acrylic paints with a glossy topcoat are a proven method of painting objects printed using Selective Laser Sintering.
Shapeways has a tutorial here: http://www.shapeways.com/tutorials/painting3dprintedsls And a blog entry here: http://www.shapeways.com/blog/archives/129-painting-your-3d-printed-models.html
Further, you can locate the recommended Tamiya paints here: http://www.tamiyausa.com/dealers/index.php
This has the iconic power symbol embossed in the top of the wheel cover, just like the power button in your Prius. More info: en.wikipedia.org/wiki/Power_symbol
Also fits Yaris, Vios
Photos: http://www.flickr.com/photos/theschlem/sets/72157632696775253/with/8449866372/
Nylon is NOT UV stable. For maximum longevity and downright good looks, you will want to paint this object. Acrylic paints with a glossy topcoat are a proven method of painting objects printed using Selective Laser Sintering.
Shapeways has a tutorial here: http://www.shapeways.com/tutorials/painting3dprintedsls And a blog entry here: http://www.shapeways.com/blog/archives/129-painting-your-3d-printed-models.html
Further, you can locate the recommended Tamiya paints here: http://www.tamiyausa.com/dealers/index.php
by
AyeJayCee
A traditional bamboo design inspired matcha (powdered) teacup based on summer designs which have a wide brim for a larger surface area to allow faster tea cooling.
Also available in sandstone, for those who wish to glaze their own.
