by
robo3687
NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
Price Reductions are now permanent
Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27
It has 3 inscriptions:
- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"
- 29 Januarie 1596: the day after Sir Francis supposedly died
- 9.32.79: The coordinates of his coffin
Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)
For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR
by
roessnakhan
A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
noesis
3D-printed metal Swan Station Failsafe Key just like Desmond's from LOST.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
by
COVO
Product Name "Screwdriver Ring". Designed by Japan.
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
MichaelMueller
This is a full working tabacco pipe. The head is made with glazed ceramics, the mouthpiece is antique bronze glossy.
+ 
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
+
A pipe is definitely a matchmaker. It makes you look distinguished and sexy. Like a successful scientist, a confident playboy or an experienced sailor.
Yeah, tabacco is bad for your health, so use bubbles instead! Works even better cause it gives you a great lemon flavour, but this depends on the dish soap you use. The ladys will appreciate it!
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself! You can find the mouthpiece here.
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
Innovo
The Mini Crowbar is both a decorative as well as practical keychain accessory (length of a typical key). It can be used for screwing, puncturing or as a keychain hanging hook.
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy). Please choose from the right.
Warning: This crowbar is size small, about 30% smaller than the medium one.
by
Tofty
This is the second and much improved version of my single-piece prybar and nail lifting tool with a range of metric hex drivers (5.5, 6, 7 and 8mm), a bottle opener, a 1/4" hex bit holder and two 1/4" hex driver points.
The centre cut-out will hold and store a standard PH2 or PZ2 25mm long quarter inch hex bit (not included).
Four o-rings are required to complete the assembly (10mm ID, 2.5mm diameter, not included)
This model is designed to be printed in Stainless Steel or one of it's variants.
I've been carrying this prybar around with my keys for a while now and it's functionality is just as i'd hoped with it not having let me down so far.
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 5.5mm hex hole.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
The centre cut-out will hold and store a standard PH2 or PZ2 25mm long quarter inch hex bit (not included).
Four o-rings are required to complete the assembly (10mm ID, 2.5mm diameter, not included)
This model is designed to be printed in Stainless Steel or one of it's variants.
I've been carrying this prybar around with my keys for a while now and it's functionality is just as i'd hoped with it not having let me down so far.
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 5.5mm hex hole.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
by
Innovo
The ''ShapeTool'' Multitool is a practical keychain accessory, useful for everyday tasks such as letter/cardboard box opening, cutting, scraping, screwing or puncturing.
''Shapetool'' specifications:
Length: 7,9 cm / Height: 2,1 cm / Width: 0,35 cm / Blade Length: 3,6 cm / Weight: 23gr
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy, Silver and Silver Glossy). Please choose from the right.
For safety reasons when carried in a pocket, a protective sheath is recommended and available here.
Note: The item you order may require cleaning of extra support material, polishing and sharpening. The item will be shipped unsharpened and the bladed side can be used as a scraper.
by
NovastarDesign
VENI, VIDI, VICI. Ceasar inspired ring, with the famous words of Gaius Julius Ceasar, meaning; i came, i saw, i conquered. Default size is 19.84 mm inner diameter (size 10). If you need a different ring-size, please click the personalize-button.
by
Mstyle183
My latest invention.. Earbud adapters for the earpods from apple.. For those that run hard and work hard.. These will help you keep your earbuds in place..
These tiny attachments use the curves in your ears to help you keep the earpods in place even when they are being pulled. These add instant value to your earphones and fixes the only flaw i see with apple's earpods.
** these also work with older ear buds provided by apple Check out my other products at shapeways.com/shops/amznfx
These tiny attachments use the curves in your ears to help you keep the earpods in place even when they are being pulled. These add instant value to your earphones and fixes the only flaw i see with apple's earpods.
** these also work with older ear buds provided by apple Check out my other products at shapeways.com/shops/amznfx
by
jamesdavid
Overview
BladeKey is an easy to use customized organizer for your keys.
Tired of your keys becoming disorganized and making a bunch of noise as you walk around? The BladeKey key organizer solves these problems by securing your keys together and allowing for easy access. The BladeKey holds keys in place with a single zip-tie from your local hardware store. The keys and rotate out like a typical pocket tool. For a demonstration, see this video. Sizing If you are considering the BladeKey, make sure you select the size appropriate for your particular set of keys. The BladeKey sizes are listed by the number of standard plain meal keys (i.e., those without plastic heads) that they are able to hold. If you have a non-standard key that has a plastic head, or want to verify that your keys will fit, measure your longest key's length in millimeters and measure the width of your set of keys in millimeters. The longest key should be shorter than the length of the BladeKey you select. The width should be as close to the with of the BladeKey. This particular BladeKey has the following interior dimensions:
Tired of your keys becoming disorganized and making a bunch of noise as you walk around? The BladeKey key organizer solves these problems by securing your keys together and allowing for easy access. The BladeKey holds keys in place with a single zip-tie from your local hardware store. The keys and rotate out like a typical pocket tool. For a demonstration, see this video. Sizing If you are considering the BladeKey, make sure you select the size appropriate for your particular set of keys. The BladeKey sizes are listed by the number of standard plain meal keys (i.e., those without plastic heads) that they are able to hold. If you have a non-standard key that has a plastic head, or want to verify that your keys will fit, measure your longest key's length in millimeters and measure the width of your set of keys in millimeters. The longest key should be shorter than the length of the BladeKey you select. The width should be as close to the with of the BladeKey. This particular BladeKey has the following interior dimensions:
- Width: 19 mm
- Length: 57 (on each side) to ~66 mm (in the middle)
by
kspaho
The one above is printed in stainless. This ring is size 12, which is 21.4mm in diameter. For more sizes, please contact me direct: kspaho172@g.rwu.edu
by
Maundy
Please note that the QR Code design has improved greatly since the taking of the above photos and looks a lot better, the QR Code is now Embossed not Engraved and is printed in the 'White Detail' material. New photos will be uploaded soon.
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
by
Magic
The Ring'n'Roll is made of two portions of spheres, one inside the other. The outer ring can turn freely around the inner one.
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
by
Dmudd91
Nice little top, I bought mine in Stailless steel. It can spin 30+ seconds, but the plastic one will most likely spin less.
by
schreerdesign
The ISkull Vamp is an IPhone 'gramophone.' The eye sockets act as amplifiers to increase the sound from the phone's speaker. We modeled this skull hollow to save you money. The Regular non-Vamp iSkull is here: http://shpws.me/3Lvz
by
Innovo
''ShapeTool'' protective sheath. Compatible with the ''ShapeTool''.
Available in multiple colors. Please select from the top right.
by
MichaelMueller
This is the mouthpiece for the Skull Tabacco Pipe.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
Attention!
The pipe is made of two parts. You need to order both and mount it by yourself!
I would suggest e.g. Sugru (sugru.com) for the sealing.
Cause the pipe is made of glazed ceramic, there is the possibility that some of the glaze stuck the openings. In case of this, you need to grind or even drill this parts to clear it.
Please order the pipe only if you think you can handle this!
Please message me if you have any questions.
by
joe1029
It may look intimidating, but it's got a very smooth feel and it fits comfortably in your hand. I started messing around with a design I based loosely on a spine and I came up with this. It fits perfectly around an IPhone 4 or 4s, but contact me if you'd like it for a different phone. But its a tight fit and all the ribs and spikes just barely touch the phone.
I'd really like to print this in alumide. That will probably be one of the next things I do and I'll post pics as soon as I do, but if anyone beats me to it please send pics :D
by
jdoll
5-3/8 inches overall, 5 inches of teeth.
Teeth have rounded tips that won't scratch and scrape on your skin. Nylon material flexes as you would expect. Practical Aesthetics logo on handle. A test print (illustrated) looks and feels quite satisfactory.
A little pricey as pocket combs go, but how many can brag they are 3D printed? Less if added to a below-minimum Shapeways order.
For a coarse/fine version, see http://www.shapeways.com/model/259456/.
by
locokimo
accessorize your large Bic lighter with this Infinite Pyramid cover (Q-Bert style). Small holes have been placed at the bottom for air circulation during lighter replacement. If the lighter is a bit loose, just fold a small piece of paper in 2, bend it, and slide it in front, between the lighter and the cover, it should prevent it from slipping out. Model in the image spent 6 hours in rubbing alcohol for de-saturation purpose
