Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

You don't have to catch 'em all, only the one you really care about.

Inspired by a touching proposal shared on the internet, this openable pokeball is just large enough to hold a ring or two. There is also an embossed line of text reading "I Choose You" inside of the lower half of the Pokeball.

Due to this model's recent success, I have decided to open up the available materials to the remaining Strong and Flexible colors as well as the metals.

Congratulations to all of the happy couples!

The Pokeball Ring Box sizes in at 4cm in diameter and opens in two pieces. Currently, this pokeball does not come pre-colored and will need to be painted or colored in some manner. This was decided due to sandstone (the only medium able to be pre-colored) may scratch and scuff anything inside of the Pokeball.

I wouldn't normally hang grass from my ears what due to the dirt, bugs, and possible grass stains but, with these Minecraft Grass Block earrings, you can avoid all those hassles while rocking your geek side.

The grassy textures on the sides were applied one color at a time to assure as clean and crisp colorations as possible. There is also a small (~2mm wide) tunnel for you to slide in a wire to hang the earrings from. This was done in order to keep the shape of the Grass Block as cubed as possible. I did not want any large loops coming off of the model itself as they take away from the aesthetic of the design.

Each earring is exactly 22x22x22mm and hangs in an isometric view to display all of the sides of the block at once.

This design is only offered in full color sandstone because, as you can probably imagine, without any of the color textures, this is a bare cube with a ~2.5mm wide tunnel born through one of the corners. There is also an open area on the bottom face to allow for draining of excess sandstone material. This was applied in order to decrease the weight of the earrings down to about 9.5 grams each.

Protip: I would reccommend hitting each earring with a little bit of clear acrylic paint in order to smooth out the surface and make the colors a bit bolder. The preview pictures above do not have any paint applied to them. Remember, many light coats are better than one thick coat.

Ring size that will go to cart: 12
If you wish to purchase a different size, select the size from the list below.

A very simple ring featuring a Pokeball as its centerpiece. It is simply a single band that meets the pokeball at the center. For measureable size reference, the pokeball is about 7mm across.

Available in the following sizes (please click the size to be brought to the appropriate purchasing site):
5
5 1/2
6
6 1/2
7
7 1/2
8
8 1/2
9
9 1/2
10
10 1/2
11
11 1/2
12

For reference: Ring Size Measurement and Conversion Chart

Protip: color the Pokeball with a bit of acrylic paint or nail polish to deepen the impact of the Pokeball itself. Do NOT use enamel paints on any of the plastics.

Note: this ring does NOT come fully colored. You must choose your printing medium and then paint it yourself (or keep as is). I suggest black detail so you won't have to worry about painting the line between the two halves.

The Pokeball is a common device used by Pokemon Trainers to capture desired Pokemon.

This particular model is designed to be hung off of a Pokedex, bracelet, necklace, cellphone, or even set of keys for easy access to your favorite Pokemon.

*Note* Does not actually contain any Pokemon nor is it capable of such. The pictured chain is also not included.

This charm has one hole on the top (underneath the loop) and another on the bottom to allow for draining of the powdered printing medium.

By request, I have made a much (MUCH!) larger version of the Wounded heart Pendant. Considering that it would be impractical as a necklace in this size, I have removed the loop and cut off the rear half of the heart. The walls should be of significant thickness and will be able to stand up to any kind of reasonable use you may subject it to.