Cutlery refers to any hand implement used in preparing, serving, and especially eating food.

Aside of the functional aspect of tableware, silverware has always been and will perpetually be an ornamental figure. Conceived to pleasure the eye while fulfilling one of our most primary needs of food consumption and or squander. Cutlery is unique in its ability to sustain time and carries a remarkable family heritage. Sets of knifes, spoons, forks have been passed on from generation to generation all over the globe, traveling the whole world as a piece of personal history.

Key elements while designing this set was the notion of decay/processing, ornamental and aesthetic excess as in former rococo and barock times, moments of collapse/disequilibrium and a balance in between etiquette dining and painful torture tools. By subverting the logic of perfection and beauty, non-perfect images coming from controlled methodologies were generated. What used to be about mastering the result of a non-perfect process is now about the production of monstrosity and the grotesque throughout very accurate mechanisms, like 3d printing. Which creates an unlimited range of possibilities concerning material usage, design approaches/aesthetics and form production.

This is the latest version of the Oracle designs. The model when printed can be used with the Transformers Prime RID Arcee figure. The figures pictures was printed using the "Frosted Ultra Detail material." If the model is used with this toy, the head can remain attached during transformation. The model only includes the head as seen in the digital rotation.. Also pictured is an artists paint up of the figure with the head. The action figure is sold separately.

A pair of hands with individually posable fingers and thumbs. Knuckle width 14mm, wrist ball diameter 5mm.

This model has been successfully tested in White Strong Flexible.

So, apparently Vangelus mentioned on WTF@TFW, the idea of using PRID Ratchet as a basis for some Autorooper soldiers... and then someone mentioned this idea to me... the result? The Ratchetrooper head mod!

This is a replacement face/head piece for Prime Ratchet. To install, you'll need a small screwdriver to remove the existing screw in the back of Ratchet's head. The two pieces that form the majority of his head will then easily come away from the transparent blue section that forms his neck and light-piping. Slot this on in their place and you're done! It doesn't screw on, but hopefully will be tight enough to stay on by friction alone. If not, you'll need a drop of glue =)

Yes, to get this head looking straight ahead, you need to angle the neck part forward quite a bit. This was necessary because of the length of the piece that forms the eyes on the original figure, I had to angle it down so that it didn't result in thin walls. There's also no light-piping on this figure, due to Ratchet having tiny eyes and the 'rooper having a rather large visor! =P

It was previously not possible to fully retract the head for vehicle mode, although it was close enough. However, this latest version features some minor adjustments that make a LOT of difference. If you trim about 2mm or so off the end of the original figure's eye section (basically the actual eyes themselves), this piece will slide on far enough to allow the head to fully retract when transformed, and also pop back up when returning to 'bot mode =D

Happy army building folks!

And coming soon... alternate 'deployed' hand weapons... and hand-held weapons too...

Front part for G2 Productions 001 "Emergency Alert" Upgrade Kit

This is the front part of the head replacement customization. Painting required.

The head will mount on the neck ball joint assembly.

Must be glued to back part, as no other attachment system is planned for this version.

Recommended material: Frosted Ultra Detail or Polished White Strong and Flexible

INFO: Even after glueing together, the head can still be removed by gently pulling it off the ball joint. This, in no way, means that your original figure can't be reassembled.

TIP: This piece will fit with the light piping component so snugly that glueing the head together might not even be necessary!

Right hand model----Set B contains The blades for the crusader, set A contains the gun parts ---- A large cannon that transformers into a even larger sword! Perfect for your TF: Prime, Optims Prime figures. The Crusader even comes with a 4.7mm handle made just for your Reveal the Shield DX G2 Prime!

The Ironside design shown is an homage to another character and may be used with the Transformers Prime RID Kup figure if you so choose. The toy is fully transformable with the print on the toy. No screws or glue is needed to use the design with the said toy. Please see picture above. This model was printed in the frosted ultra detail material and only includes the head shown in the digital rotation. The toy pictured is not included with you purchase and is sold separately. .

Skyfire head, 1.4cm by 1cm, neck 3mm by 4.5 mm (suitable for Revoltech neck peg)