The GlassKap Kickstarter campaign is a range of accessories for Google Glass to either give those around the wearer privacy, or make explicit that the glass is 'On Air' and may be recording or even streaming what the wearer is currently seeing.
Along with the GlassKap, the product range also includes a few less functional and more fun items such as a wearable planter, pencil holder and laser sight. Although this is a playful response to the privacy issues surrounding google glass, it is also indicative of what is possible with 3D printing, to embed smart devices into almost any 3D printed product. Glass is starting to become a recognizable form that may indicate that you are being filmed, but what if someone were to 3D print a new housing and place the tell-tale form behind a polaroid lens.
You can support the Kickstarter campaign for as little as $1 and for as little as $20 you can put a Kap on that Glass.
Mixing 3D printing, craftsmanship & honest design, Lance Atkins wants to bring useful, 3D printed goods into your home with the help of Shapeways and a Kickstarter project entitled Inherently Useful.
Over the past two years have seen an avalanche of Kickstarter projects launching 3D printers, 3D scanners along with the occasional project using 3D printing as a way to reward some of their backers but Inherently Useful may be the first to tie 3D printed products into every level of the project.
A range including a pen, vase, iPhone dock and lamps the range all uses Shapeways 3D printing to make fully functional objects for your daily use. The range has evolved out of products that Lance wanted for himself, and as is often the case on Shapeways, when you make something EXACTLY as you want it, often others have the same need and aesthetic so the product resonates with them in the very same way, it may even inspire them to make something for themselves.
"When I make something for myself, it's perfect, for me"
You can back Lance's Kickstarter project for as little as $1 but $29 will get you a 3D printed pen and over $350 will get you a couple of very cool 3D printed lamps, powered by Shapeways 3D printing:)
The Eames Lounge Chair and Ottoman is a mid-century modern design classic first released in 1956 by husband and wife design team Charles and Ray Eames but even after ovder 50 years of being in production, even the reproductions are prohibitively expensive, until now.
The Mini Eames Lounge Chair by kspence is a 1:20 scale miniature is about 2 inches tall and at just over $25 as a full color 3D Print is 1:67th the cost of a full scale reproduction. Do the math, it's a bargain and you can hold a piece of design history in the palm of your hand, maybe even make the perfect seat for Sad Keanu?
Our mission at Shapeways
has always been to enable anyone to make anything they want. First, we
built a system to allow Makers to design and purchase models for
themselves. Then we created Shapeways Shops to enable anyone to launch a
business and sell their products worldwide. Now, we want to make it
easier for Makers to gain access to the newest 3D printing materials on the market and test them with us. Think about it like one big, global 3D Printing R&D team.
excited to announce the launch of our first 'Maker Only' material: a
flexible, rubbery plastic called Elasto Plastic! The finish, color, and
properties are not yet ready for sale to a wider audience, but it's a perfect
material for any Maker out there who can work with a textured surface and
maybe a little extra powder arriving with their model.
The new, improved Elasto
Plastic is a great option for Makers as it is an incredibly durable
material with a lot of really interesting properties such as high impact
resistance, flexibility and compression (depending on the geometry), along with a high level of static friction because of the surface
texture. Though not strictly water-tight, it can hold liquids, but it does
not like high temperatures or fire. It is a valuable addition to our 3D Printing material options here on Shapeways that we are sure you will
find incredibly useful and fun.
Do you have questions about Shapeways 3D printing materials and processes? Want to know how to optimize your design to ensure it gets 3D printed first time? Do you need advice on what software might be best to best make your ideas for real. Join us for a Google Hangout with Shapeways 3D printing engineers this Friday at 5pm NYC time and we will answer as many of your 3D printing questions as possible.
If you have a specific question ready to go, please ask in the comment section of the blog and we will try to address those questions first.
Sometimes we see some of our really popular products on Shapeways enter the world using other manufacturing processes. On some occasions, due to licensing reasons a product may no longer be available on Shapeways if it is being produced by another manufacturer, and sometimes it remains available simultaneously as a 3D print and a mass produced item when the designer retains all ownership of IP. We are always incredibly proud to help a designer take their product to market no matter which way they go, a little sad if they leave Shapeways, like sending a child off to college, but happy for the designer's success.
The latest product looking to go down the mass production path is a recent favorite on Shapeways, the MagSafe Adapter Key Ring by jbobrow now hitting Kickstarter as the Keybit. Jonathan's Kickstarter campaign pays tribute to the speed and ease of 3D printing and taking a product to market with Shapeways in his video and in his rewards which includes a Shapeways 3D printed version at reward levels over $30. Jonathan also offers a one on one google hangout to help a backer over $200 take their own product to market using 3D printing.
Check out the video and support Jonathan on Kickstarter.
The replacement part is not available from the manufacturer but he has the existing broken part that will be relatively easy to copy for someone with basic 3D modeling skills. If you are a 3D modeler who is capable of helping baerfoot keep his wife caffeinated drop him a line in the Shapeways Forums. While you are there you may as well submit your portfolio in the 3D Modelers for Hire section too.
When a small part for Shapeways community member Mitagaki's Panasonic Bread maker broke he looked everywhere for a replacement part. The manufacturer no longer supported the model so what was a $5 replacement part became unobtainable and the $200 appliance was rendered worthless.
Rather than throwing the entire appliance away, Mitagaki 3D modeled a copy of the broken ceramic part and then 3D printed it in ceramics with Shapeways.
Usually when we think of iPhone apps we think of applications within the iPhone but this application makes it easy for anyone without 3D modeling skills to create a customized stand in just a few mouse clicks.
What makes this app really interesting is that it uses 3D printing to make functional, not decorative items. Most of the apps so far plugging into the Shapeways 3D Printing API on the Create page are making sculptural, cosmetic products or jewelry while there is a huge potential in making 3D Printing apps that connect things to things.
If you want to 3D print a custom product but do not know how to 3D model the iOS Stand Creator App is a great way to get started, if you are a designer and/or developer interested in getting into the 3D printing app market this is a great example of how to make a customizable, functional product. Take a look at some of the stands made so far that are now ready to 3D print.
Anyone who owns a desktop 3D printer knows that sometimes you need to replace some of the components to optimize performance. In many cases you can simply 3D print a replacement part with your 3D printer which is an incredibly rewarding process of self sufficiency but when it is a critical component that stops the 3D printer from functioning properly it can quickly become frustrating dead end.
Shapeways community member Schlem discovered the extruder gears that came with his Printbot Kit were warped and his 3D printer was not functioning properly. Of course a non functioning 3D printer can not 3D print repair parts so he used Shapeways to 3D print his replacement parts in laser sintered Nylon. By using Shapeways to 3D print the parts for his 3D printer he now has a more durable, higher resolution part that will make his desktop 3D printer more accurate and reliable.
He also made it possible to make the 3D printer even more awesome by designing the Skulltruder, adding a little gothic bling to what is essentially an engineering project.
If you have any 3D parts to share on Shapeways, be sure to tag them '3D Printer' and the type of 3D printer they are for so others can easily find them and repair their 3D printer too.
Using a 3D Printed Hang Glider Bracket and The X Bracket Universal Smartphone Holder Tom Rust shot a HD video of a flight over Fort Funston, San Francisco CA. With a view of the North Pacific coastline including Daly City, Northern Peninsula, San Francisco out to Point Reyes and as far east as Mount Diablo, Sutro Tower and Golden Gate Bridge as well as peaks of downtown San Fransisco.
We were happy to have Joshua Harker visit us at the Shapeways HQ in New York City to finally meet after 3D printing SO MANY of his skulls. We took the opportunity to record our part of our conversation about how he used Shapeways 3d printing and Kickstarter to take his career into a new direction, how on demand 3D printing makes it possible for artists and designers to realize their ideas, and how platforms like Shapeways and Kickstarter make it possible to reach a massive audience with no financial investment or risk. In short, 3D printing and the 3rd industrial revolution as celebrated by his latest Kickstarter project, Anatomica di Revolutis.
The full interview runs for around 15 minutes and covers much of Joshua's amazing success over the past 12 months, check it out.
This weeks Designer Spotlight focuses on Stijn van der Linden, the creator of one of our most popular items on Shapeways: Gyro the Cube. He is an avid and prolific designer, and he also finds time to answer questions on the forum as one of our moderators.
Hi everyone! My name is Stijn van der Linden, probably better know as Virtox around here . I live in Tilburg, in the Netherlands together with my lovely wife and son. I am a work-at-home dad, so I juggle my time between housekeeping, changing diapers and late night sessions of tinkering, designing and programming. I have a college degree in Electrical Engineering and worked as a software engineer for several years, but shortly after discovering 3D printing and Shapeways, I switched careers to my life long passion of 3D Art & Design.
What's the story behind your designs? What inspires you?
Initial sparks often come from the intrinsic beauty found in nature, science and life: a twig, an atom or a kitchen sink. I have a particular fondness for using primitive shapes, such as circles, cubes and spheres and morphing them into the desired forms.
How did Gyro the cube come about?
I have a great love for trying to create the impossible and this is clearly visible in Gyro the Cube. At the time I had just discovered the real power of 3D printing and the possibility to make stuff with moving parts. So, while I was playing around with morphing cubes into spheres and vice versa, I noticed that two of these closely nested cubes could rotate freely about a diagonal axis. I could then repeat this and change the axis for each one and make this impossible looking gyroscopic sculpture, that could (theoretically) move and spin straight from the printer! I was quite anxious after ordering, whether I had made any calculation errors and if it would actually work. It did spin (phew!) and the ease of movement exceeded all my expectations! I still keep one handy near my desk.
How did you learn how to design in 3D?
I am mostly self-taught, as a young kid I started with simple 2D graphics and programming in C64 BASIC. This quickly went on to more advanced programming languages and working with 3D in PovRay, a very elegant scripted 3D rendering engine. During college I had access to more advanced software, like 3D Studio Max which had even more powerful scripting languages and programming APIs. All this evolved to the point that I stopped using off-the-shelf software and I currently make most of my work with home-brew software built in C++.
What brought you to 3D printing with Shapeways?
In August of 2008 I saw a mention of Shapeways somewhere and I signed up for the closed Beta. At the time I thought it was mostly expensive and very complicated, but I kept a close eye on the newsletters and forum and started to learn about the wonders of 3D printing. I tinkered about on the site, uploaded some models and tried the shop feature. To my shock and amazement, I sold something within mere days! Someone had actually bought Holey, a model I had designed years before and now someone, somewhere, was actually going to hold something I had once designed to be impossible to make. And worse, they beat me to it! So this led me to quickly place my first order and ever since I've been hooked on 3D printing.
How do you promote your work?
It has never been my strong suit, and it's hard to find the time, but I try to post updates to social networks as much as possible, such as Facebook, Twitter and Tumblr, my own blog and occasionally to design blogs and websites such as Designspotter and Behance. But all things marketing, I learned from the Shapeways blog, as it contains a goldmine of tips, tricks and hints on how to promote your designs and shops.
Who are your favorite designers or artists? Who in the Shapeways community has served as an inspiration to you?
My all-time favorite artists are Salvador Dali, M.C. Escher and H.R. Giger. Their mind-bending work really sparked my love for art and I am very fond of surreal and impossible looking stuff! After four years of being part of this community, I must say there are so many great members helping and inspiring others, I could not hope to name them all! So a big thank you to ALL for making this place the success it is today! A special shout-out to Youknowwho, Magic, StonySmith and Stop4Stuff for driving the community forward and to Nervous System, Bathsheba, Unellenu and Opresco for making the most inspiring works. And apologies to all that escape my mind at the moment!
If you weren't limited by current technologies, what would you want to make using 3D printing?
Oh wow, well just about anything and everything! I can't wait to sink my teeth into an impossibly shaped designer steak, sit down in a fully personalized chair and strap on that pair of extra robotic arms to get things done. But this technology is evolving so quickly I really do not feel limited. If anything, 3D printing just seems to be the ultimate addition to any toolkit.
Thank you to all Shapies for all your efforts to make the impossible possible, you are changing lives and the world with it!
Check out Stijn's incredible designs on his Shapeways Shop, his website, or hop onto the forums and chat with him and the rest of the Shapeways community.