The Shapeways Blog: 3D Printing News & Innovation

Shapeways Blog


Smooth vs Standard Nylon 3D Printing


Comments

Display comments as (Linear | Threaded)

As far as color sandstone goes, I think that if there is no polished option something like a shiny coated enamel-like wash over them could be a good option... Something that would seep into the ridges to smooth them out, and turning the object glossy.
#1 Joaquin Baldwin on 2012-10-08 15:59 (Reply)
Yes, bring it on! You know that we want some better eyewear, cases, jewelry, gadgets and so on! And size sounds still alright!
#2 Salokannel (Homepage) on 2012-10-08 16:53 (Reply)
Second that! :-)
#3 Stijn / Virtox (Homepage) on 2012-10-08 17:05 (Reply)
Smoother finishes on all the colored materials would be a nice option. Some type of coating is also an acceptable option, especially if it can seal the surface & make it waterproof.
#4 Tom Rust (Homepage) on 2012-10-08 17:13 (Reply)
We have looked at smoother full color but are yet to get it to be totally reliable.. We do have some interesting experiments up our sleeves...
#5 Duann on 2012-10-08 17:23 (Reply)
Great, we will see what we can do.
#6 Duann on 2012-10-08 17:23 (Reply)
Smooth colored prints would be great! This combinations makes "perfect products" out of prints. But please do continue rough colored prints as some fragile structures could not get dyed any more. I'm already looking forward to this new option!
#7 scientist2010 (Homepage) on 2012-10-08 18:54 (Reply)
Smoothing all 3D printed objects would be great, if it didn't effect the fitting. Some products I designed require a tight fit, so I don't know if polishing is an option for that.
#8 KoenvanTartwijk (Homepage) on 2012-10-08 20:19 (Reply)
All items smooth BUT the wall size must be bigger and maximum size is smaller? No, thank you, add options if you want, but no steps back. Also, people have complained that current smoothing process reacts with some paints.

Now, if it means you stop using a tumbler and change to machines with finer dust and thinner layers, that would be great.
#9 stannum on 2012-10-08 22:39 (Reply)
Yes colored smooth prints would be great!
I don't mind the small build area.
#10 Aaron (Homepage) on 2012-10-09 08:00 (Reply)
Would be great to see coloured wsf prints smoother.. so they come closer to the moulded products feel.

The current dyeing process, is not that great, it makes the product feel ruff, also a lot of products I’ve seen painted by Shapeways weren't cleaned properly before dyeing, therefore lose powder in colour appears to come from the models and leave white spots on the 3D printed dyed parts!

Is it possible to add colour pigment to the wsf process so that dyeing afterwards (which is not that great) can be left away? And then it would be nice if those colour parts (smaller parts) can be polished..
#11 Anonymous on 2012-10-09 09:33 (Reply)
I would like colored SF prints, even with reduced size. They would be good for bracelets and other jewelry that gets handled a lot.

As an alternative, how about a clear coat post processing option? I often spray clear acrylic on parts that will be handled a lot, so they feel smoother and stay cleaner. Would love to have that option direct from Shapeways!
#12 Marcus (Homepage) on 2012-10-10 15:39 (Reply)
Hi Duann,
Colour printing is great, even with the rough texture, but it currently stains with water. I think thats the most urgent problem, can you not spray a watertight protective coating over it? Thanks,
@M_PF
#13 Plummer-Fernandez (Homepage) on 2012-10-10 17:11 (Reply)
Awesome, I am glad most of you are excited about smooth color nylon prints.

We will do a test on water fastness. I think this process will be better..
#14 Duann on 2012-10-11 14:04 (Reply)
Frosted (ultra) detail comes with residual support material that is difficult to remove and changes the appearance so much as to make it unsuitable for my purpose. I'd like to see better removal of this substance in post-processing.

For those who haven't seen this, I get models that are partly transparent and sticky and partly frosted and nonsticky.
#15 Tom Permutt on 2012-10-11 17:20 (Reply)
Hey Tom are you in USA or elsewhere?
#16 Duann on 2012-10-11 17:32 (Reply)
yes, we would love to offer some protective UV coating.. we will see how we can add that into the service.
#17 Duann on 2012-10-11 18:04 (Reply)
USA
#18 Tom Permutt on 2012-10-11 18:43 (Reply)

Add Comment



Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.
CAPTCHA

  
  
The Shapeways Blog: 3D Printing News & Innovation

Learn More »