At Shapeways we use a range of different 3D printing technologies to create your 3D prints depending on the material you choose. We use terms like White Strong & Flexible, Frosted Ultra Detail and Full Color Sandstone to describe the material properties, not the process or material brand name so that people with no experience can better choose the materials to use for 3D printing. On the materials page you can dig in to get more detail on the materials and processes used to have a deeper understanding.
Shapeways co-founder and Chief Technology Officer Robert Schouwenburg has a personal blog he uses to keep track of his thoughts on 3D printing, online creation & personal fabrication which is a great source of information. We will occasionally 'reblog' his posts as they are a great resource and offer insight into some of the thinking behind Shapeways. The first we would like to post is 3D Printing Technologies Explained which, ahh, explains some of the current 3D printing technologies.
The rest of this blog post will be a direct copy of Robert's post from July 21st 2011.
In this post, I would like to give an overview of the 3D printing
technologies which exist today. Each of these technologies deserves a
blog post on its own, but I want to start with an overview.
While writing this – long – blog post, I realized that I needed to
introduce some concepts first before I explained the specifics of each
of the technologies.
Build platform – platform on which the parts are build. Just imagine a plate which can be lowered and raised.
Build chamber – chamber in where the 3D printing
takes place. It consists of the build platform, heads / laser or
projectors, the material distribution and depositing mechanisms.
Layers – 3D printers build parts in layers
which are stacked on top of each other. In most
cases, you can recognize the layering when examining a 3D printed part.
Support structures – structures to help the
printing process. The structures support overhangs while printing making
sure the part does not collapse on itself during printing.
Support material – special material for
making support structures. The reasons to use a different material is
that it is easier to remove and recognize during cleaning of the part.
SLA – Stereolithography Aparatus
This is the oldest commercial 3D printing technology invented by Chuck
Hull in 1984 and commercialized by founding 3D systems in 1986. The
printing works by having laser solidifying a liquid resin in a VAT on a
build platform. The next layer is added by lowering the build platform
inside the VAT. After printing, the part is cleaned in a chemical bath,
and cured in an UV oven. This technology needs support structures.
A variation of this technology uses DLP (Digital Light Processors)
instead of a laser to cure the resin. This makes the printing process go
SLA systems are manufactured by 3D Systems, Envisiontec (DLP) and ZCorp (DLP)
For more information see this excellent Wikpedia article.
SLS – Selective Laser Sintering
This technology was invented by Dr. Carl Deckard around the same time as
SLA. The process is essentially fusing small particles in powder form
together using a laser. Just below the powder this is
a build platform which lowers to make room for the next layer. A wiper
redistributes the powder over the platform, and the next layer is
fused by the laser. This technology does need support material or
structures. The powder functions as a support.
Using SLS several types of plastic, metal and ceramic/sand powders can be used.
SLS systems are sold by EOS and 3D Systems.
For more information see this Wikipedia article,
FDM – Fused Deposition modeling
Scott Crump invented FDM in the late 80s and commercialized it through
his company Stratasys in 1990. FDM printing works by extruding
a material through a nozzle and move the nozzle over a build platform to
“write” the part. The next layer is added by lowering
the build platform. Support structures or materials are necessary for
this technology, but not all manufacturers offer that option and thus
limiting the usefulness of their FDM systems.
Common materials are plastics, but other compound materials are used as
well. FDM technology is employed by many low cost hobbyist printers.
FDM systems are sold by Stratasys, Makerbot, UP!, Fab@Home and others.
For more information see Wikipedia
3DP – Three Dimensional Printing
This technology came out of MIT and was invented in 1993. It is
commercialized by Z Corporation, but others use the same technology, as
well. 3DP uses a powder as well in the printing process. The powder is
“glued” together by binder on a build platform. The binder is
deposited by a moving head. The next layer is added by lowering
the build platform. A wiper redistributes the powder. The powder acts as
support, so this technology does not need any support structures or
material. The parts are extremely fragile after printing and need to be
carefully cleaned and cured.
There is a wide range of options for powder and ranges from plaster,
ceramics, metals to glass. Unique to the commercial application of Z
Corporation is the ability to color the parts during printing resulting
in parts delivered in full color.
3DP systems are manufactured by Z Corporation, ExOne and Voxeljet.
For more information please see the 3DP page at MIT.
Polyjet matrix printing
This technology is specific for Objet Geometries. The process builds
parts by extruding or jets extremely small droplets of material onto a
build platform. The head can drop multiple droplets at the same time –
hence the name matrix. After depositing, the material is cured using UV
light. The next layer is deposited on top of the previous layer. This
technology uses support material during building.
The material used in this process is a polymer. Unique to this process
is that it can use two distinct materials to build a part including
mixing these two materials in different variations.
Polyjet matrix systems are manufactured by Objet.
For more information see Wikipedia.
EBM – Electronic Beam Melting
This printing process is developed by Arcam which was founded in 1997.
This process uses a powder which is fused together on a build platform
by an electronic beam. By lowering the build platform and redistributing
the powder using a wiper, the next layer can be build. The process is
similar to SLS but uses an electronic beam instead of a laser.
The powders are always metals with different types of alloys. The build chamber is a vacuum and heats up until 700 – 1000C.
EBM systems are manufactured by Arcam
For more information see the EBM Wikipedia page
LOM – Laminated Object Manufacturing
This technology is developed by Helisys. it uses thin sheets of material
which is cut by either a laser or a knife according to the outline of
the part. Next the sheet is glued on top of the previous cut sheet of
material. After printing the excess material is “broken” off and you are
left with the printed parts.
LOM printers mostly use paper, but there are also other materials – mostly various plastics.
LOM systems are today only manufactured by Mcor technologies.
For more information see this – somewhat sparse – Wikipedia article.
These are the most 3D printing technologies manufactured today. There
are more technologies and variations available in both research
and production, but they focus on real niche areas.
Every coin has two faces but we should consider positive side and control the negative. 3D printing has proven to change everything. It has great potential in the production application that seems different from the crowd.